Airborne fifth wheel shocks

[JackPBass]

Howdy
I have a 2011 3055 Bighorn and after upgrading to a 3500 silverado i find that the beating the fifth wheel is taking isn't acceptable.
can you tell me what part number of Airborne I would need to buy to fit my fifth wheel.

Thanks for your support
Jack
jackbass@com-co.com

 

[GOTTOYS]

You have a Lippert 1621 pinbox. You will need the replacement for that. Any good dealer can tell you which one you need. I would shop online. You can get some good prices. It's easy to install. Set it on your tailgate. Block it up so it's close in height then use your front stabilizers on the trailer to raise or lower it to get it lined up. I did my Trail-Aire by myself at home when I wanted to change the height of it. Took about a half hour using an impact wrench...Don

 

[truknutt]

Here you go...from the Reese website. 16K version of Lippert 1621: 5AB-E1621-16K

They also have a 21K version for the Lippert 1621HD: 5AB-E1621-610

 

[JackPBass]

Thanks a bunch not i just gotta install it

 

[JohnDar]

Thanks a bunch not i just gotta install it

Heartland puts 1621HD pin boxes (not the 1621) on most, if not all, of the Bighorns. You'll need the 21K 5th Airborne (5AB-E1621-610) pin box to replace it.