poverty50valley
Member
We bought a 2008 North Trail 28rls new in May of 09. At the time there was paperwork in the trailer that showed the dealer had replaced the vinyl. In trying to find out why. we were told someone had probably stepped on a screw and gouged the vinyl. In didn't seem the slideout worked properly, but having never been around one assumed it was as it was supposedf to be, until we noticed when bring it in it was tipped so that it was gouging the vinyl. We glued the vinly down, it worked for a few times and started gouging again. We took it to the dealer, he said it was evidently mounted incorrectly, he tore it apart, took the tipout out, replaced the vinyl and seemed to be working ok. Now a year later while changing a flat tire with the slideout out I noticed the rollers that the slideout rolls on had worn completely through the fiberglass on the bottom of the slideout and it was rolling on wood. It talking with Gary in customer service and with the dealers the fix seems to be to put metal for the rollers to roll on. My question is why did this happen? Apparently this has happened before because Gary in customer service came up with a fix very shortly. We've also had a problem with the tires. We pulled the trailer approximately 15000 miles, give or take. In that time we've had to buy the second set of tires, making it the third set in 15,000 miles. This is all 4. Thought perhaps we were overloading it so pulled on the scale fully loaded for travel, the axels weighed 5500#. HELP!!!!!!