Battery Disconnect switch problem

[Mark1959]

I have a new Heartland Mallard m210rb . When I turn the battery disconect switch nothing shuts off of course when its in the on position its also all still on. Im assuming something is not wired correctly. I noticed on the positive side from the battery to the switch hooked up to that side a wire runs to the junction box to a cluster of wires. I switched that wire to the other side of the switch and everything is off when switch is off and on when it is on. Tested everything i could without shore power all worked fine. With shore power everything i could check works fine Battery charged converter ran micorowave air conditioner everything seemed fine

Ill add a couple of picks just want to see if anyone knows if this should be ok ! Im done waiting on camping world I can't even get them to return my call. Been talking to heartland some sent them this information hope to hear from them monday.
Thanks
Mark

 

[Mark1959]

Pic with details

 

[david-steph2018]

Good job on figuring out the issue.

 

[Mike Wynn]

I think I might have the same issue, to push or pull the disconnect plunger seem to do nothing. I see no difference when the switch is in or out. I was hoping to find someone that could explain what should happen when the plunger is in? When the plunger is out? I have a 2022 Sundance ML231ultralite.

 

[Mark1959]

I think I might have the same issue, to push or pull the disconnect plunger seem to do nothing. I see no difference when the switch is in or out. I was hoping to find someone that could explain what should happen when the plunger is in? When the plunger is out? I have a 2022 Sundance ML231ultralite.

Mine is a simple on off switch turn to on turn to off mine was wired wrong where it was always getting power to the unit !

 

[wdk450]

Mine is a simple on off switch turn to on turn to off mine was wired wrong where it was always getting power to the unit !

More lack of basic production line quality assurance checks.