I have a 2012 cyclone 3010 HD toy hauler and due to a blowout I have a bent bracket. The bracket is on the kitchen slideout side and is bolted and welded to the frame and has a squaretube on other end. I need to see a picture so I know how it was attached to the other end and if I am missing any pieces.If anyone can send a picture of what it looks like attached it would be greatly appreciated.
Best I can tell from your description - you need to verify what model you have. You mention the bracket is on the kitchen slide out side, but your picture shows the opposite side (sewer connection)
AFAIK, all 3010's have 2 slides on the left or off door side. 3110's have 3 slides, 2 on the left side and a kitchen slide on the door side or right side.
I'm guessing you have a 3010, 2 slide model. If you do, then maybe these pictures will help. These are about the best I can do for now. Our 3010 is covered, so I can't open the slide and it is snowing.
Off door side (street side)
1st picture is looking front to back, next 2 are back to front.