does Heartland/Big Horn offer a 2 inch hitch receiver. Looking for a 2 inch receiver to install on rear of Big Horn 3260 elite for a scooter.
I just spoke to Kary and he confirmed that Bighorn continues to be orderable with the 1-1/4" receiver.
Yeah, but like you said Jim it only supports 150 pounds and I would sure be leery of putting anything even that heavy on the one on my BH . . certainly not a scooter.
I know this is close to a year old but I was wondering how the Curt RV Hitch has worked for you? We just got a BH 3270RS that has the mounting brackets and looks like the Curt RV hitch will work good for a bike rack.
Nice job! Another good idea for my generator/cargo rack.View attachment 39568View attachment 39569View attachment 39570
Built my own bike rack for our BH. I designed it to use 2 receivers. This increases its
capacity and stops all wobble. Future plans are to build a carrying rack in-lieu of bike rack. I bolted it directly to frame with grade 8 bolts.
Here is what I installed on our Big Horn. http://www.amazon.com/Curt-Manufact...&qid=1411782316&sr=8-2&keywords=curt+rv+hitch
I did bolt to the existing rear brackets, but fabricated front brackets from angle iron. Only problem was that I had to adjust the tongue angle since the rear brackets were lower than the front frame. I wanted the drawbars to be level with the ground.