Closet Rod support Bracket

[crmfghtr]

Does anyone know where I can get the same closet rod support brackets as shown in the attached picture. Already been to Home Depot, Lowe's, and Ace no luck.



Thanks,

 

[NP_Chief]

Looks like a name on the side of it... Have you tried doing an internet search?

 

[wdk450]

The closest I could find on the internet was this one: https://www.amazon.com/Hillman-GroupThe-853036-Closet-Support/dp/B00GS8JIJ2?ref_=fsclp_pl_dp_3

FYI: I did a Google search on "Closet Support Bracket", then clicked the "Images" option tab. On this particular search you had the option narrow the answer images to "Center" type brackets. Clicking on the individual images can lead you to the seller webpages. Lots of choices on this results page.

 

[crmfghtr]

Looks like a name on the side of it... Have you tried doing an internet search?

Yea, I tried but my eyes aren't as good as they used to be besides I was all contorted trying to read it. The picture I took is too blurry to read. Lol...
I guess that's what happens with age.
Thanks,

 

[NP_Chief]

Just realized you have a 2020 model... I bet Heartland still has a few laying around. Give them a call with your VIN and see if they can help. VIN should be easier to read than the name on the bracket.

 

["Hi-Viz" Bill]

We have the same brkt in our '16 Newport .. the name on the side is "Johnson" ..

A Google search found this !!! ... https://johnsonhardware.com/9027-closet-rod-support-bracket

Hope this helps !!

 

[pegmikef]

The bracket came off of mine along with the rod and all the clothes. Since the place where it is screwed in was flimsy, I just used a notched 1x3 cut to length to support the rod and tied the 1 x 3 to the solid wood of the shelf behind the clothes using corner and flat brackets. Has never moved in almost 20 k miles.

 

[jbeletti]

I agree with NP_Chief - call Heartland Customer Service at 877-262-8032. Describe it and send them a picture if needed. Be sure to advise it's NOT an end bracket. They'll likely send you one.

 

["Hi-Viz" Bill]

The bracket came off of mine along with the rod and all the clothes. Since the place where it is screwed in was flimsy, I just used a notched 1x3 cut to length to support the rod and tied the 1 x 3 to the solid wood of the shelf behind the clothes using corner and flat brackets. Has never moved in almost 20 k miles.

I did the exact same thing !!!

 

[crmfghtr]

Hi everyone, UPDATE the closet rod support is Johnston. I did a search and found the exact support only a couple bucks each. Cost more to ship them I ordered 2. I want to beef up the support rod. (The bride has alot of clothes)
Anyone interested you can get them here.

Https://johnsonhardware.com

Take Care,