We will be picking up our 2010 Landmark Augusta on Thursday, and are going to be adding disc brakes and had a few questions. We'll be ordering a disc brake kit to install ourselves - does anyone know what the bolt circle and bolt size is for the 8 stud wheels on the Augusta? Also - does anyone know approximately how much brake line we're going to need to go from the front axle to the front compartment? And lastly, does anyone have any suggestions where the best place is to order the kit from? Preferably somewhere in Utah but if you know of a place elsewhere in the USA please let us know. Thanks!
TXBobcat
Fulltime
We just had disk breaks installed on our Bighorn by Mor/Ryde. The use an actuator that works with my 2006 Ford and they have the adapter that is needed for the newer Fords.
I don't know what TV you have but you might contact Gary with Mor/Ryde and see what they use...
This might be helful for you.
gary.wheeler@morryde.com
Hm: 574-262-2759
BC
I don't know what TV you have but you might contact Gary with Mor/Ryde and see what they use...
This might be helful for you.
gary.wheeler@morryde.com
Hm: 574-262-2759
BC
Similar threads
