57chevyconvt
Well-known member
I recently by-passed the thermo switch located on the condensing coil fins that controls the two small cooling fans so that the fans run continously when the refer is in operation. This was done bases on key learnings from reading many post, not only those on the HL forum. Much to my supprise the fans are very noisy, high pitched sound that is tranmitter into the interior of the RV. Each of the fans have an independent ground wire that is terminated below the control board. I disconnect each of the ground wires, one at a time, to see which fan was making the noise. Both fans make about the same amount of noise. I installed a toggle switch in the ground wire(s) so that I can turn the fans off/on as needed for added air flow on hot days. Seems to me that the method of mounting these small computer power supply fans is such that any and all fan noise is tranmitted into the refer box.
My qestion is: Have others experience this type of fan noise and if so what did you do about silencing the noise?
My qestion is: Have others experience this type of fan noise and if so what did you do about silencing the noise?