I installed a sound bar to my TV and discovered a HDMI wire in the upper cabinet that was not connected. I cannot get a picture on my TV from my Jensen CD player so I am surmising that is the issue. However I cannot find where I would plug it in nor where it came from. I cannot access the rear of the stereo as I cannot seem to get to the screws to remove it. Any suggestions would be appreciated.
DVD Wiring connection to Jensen stereo/cd player
- Thread starter tallen126
- Start date
JohnD
Moved on to the next thing...
Your Jenson CD/DVD player is most likely not a BlueRay player.
Therefore...you'll need to plug the Yellow/Red/White RCA jack wire to the back of your TV's input to get the video to play through your stereo and TV.
Although, the way most of us do this is to just forget about the fact that the Jensen is a DVD player and go buy a real BluRay/DVD player and plug that in to the TV's HDMI's input, ,then plug the TV's headphone jack output to the Jensen input so that we get the simulated surround-sound through the trailer's stereo system.
Therefore...you'll need to plug the Yellow/Red/White RCA jack wire to the back of your TV's input to get the video to play through your stereo and TV.
Although, the way most of us do this is to just forget about the fact that the Jensen is a DVD player and go buy a real BluRay/DVD player and plug that in to the TV's HDMI's input, ,then plug the TV's headphone jack output to the Jensen input so that we get the simulated surround-sound through the trailer's stereo system.
