Deepsky3539
Active Member
I found instructions on-line for mounting my tie down rails and I have a few questions. First of all , the instructions specifically mention a diagram for placement that I can find nowhere and secondly, they also state to be sure to get in to the frame. With the heavy stuff people are putting in these units, it definitely makes sense to get the tie downs hooked in to the frame but without the diagram, I would have to guess and I am not the guessing kind. So ... First question:
1. Do you indeed have to get the rails in to the frame or are the 15 screw holes per rail enough (screwed in to the decking) to do the job? If so, what size screws do you recommend?
2. If you must screw in to the frame, where can I get a diagram or description of where the frame members are?
Thanks in advance.
1. Do you indeed have to get the rails in to the frame or are the 15 screw holes per rail enough (screwed in to the decking) to do the job? If so, what size screws do you recommend?
2. If you must screw in to the frame, where can I get a diagram or description of where the frame members are?
Thanks in advance.