jeffdee
Well-known member
Anyone experience this? I have been unable to trouble shoot the circuit that energizes the start switch in the cabinet or at the generator. All other 12v accessories are functioning: lights, slides, front hydraulic supports. No blown fuses that I can find. Is there something I might have disturbed electrically when installing the new battery. I have a 2014 Cyclone 3110. On the battery there were two wires on the positive and a single wire to ground. I had shore power unplugged when I changed the battery. The old battery was 4 years old. Probably a weak cell. Not been having any electrical problems prior to this event. I saw on another post with a picture something about a small relay to reset. I cannot locate it on the wall with all the 12 volt wiring. This is behind the battery in the generator compartment.
I would appreciate any suggestions.
Thanks,
Jeff
I would appreciate any suggestions.
Thanks,
Jeff