I have a 2012 3685 and the landing gear switch took a dump. The nearest parts place gave me a switch with 2 of the 6 connections jumped. That's fine there are only Blue, Yellow, Green and red on the trailer wiring. But seems in any configuration it's not elevating. I hear motors buzzing when pressing the switch but nothing happening with height of trailer.
The original switch has 6 connections with the red and the blue having jumpers so those 2 wires occupied 4 of the connections if that makes sense.
Also can't seem to find where I can manually raise and lower the hydraulic front jacks from?? Anyone out there with some knowledge of this would be appreciated.
Vicrider
The original switch has 6 connections with the red and the blue having jumpers so those 2 wires occupied 4 of the connections if that makes sense.
Also can't seem to find where I can manually raise and lower the hydraulic front jacks from?? Anyone out there with some knowledge of this would be appreciated.
Vicrider