Help me identify this part

[txtinman]

Help me identify this part (SOLVED)

My 2018 RW426 has two of these mounted on the back. One on each side of the ramp. I can't figure out what they are used for.

 

[david-steph2018]

These are not on our 2018 RW427. But could it be for an awning support for the rear awning?

Not sure just a guess.

 

[txtinman]

These are not on our 2018 RW427. But could it be for an awning support for the rear awning?

Not sure just a guess.

That was my first guess, but my awning doesn't have supports.

 

[LBR]

That was my first guess, but my awning doesn't have supports.

Roll the awning out completely, get a step stool, and check the very end of it. Supports should be there, slide out from the awning, twist, and hook to your brackets in question.

 

[txtinman]

Roll the awning out completely, get a step stool, and check the very end of it. Supports should be there, slide out from the awning, twist, and hook to your brackets in question.

I'll check this out tomorrow.

Sent from my SM-G965U1 using Tapatalk

 

[jerryjay11]

Definitely awning supports. Used them on last two campers. Awning supports rods could be extended to the ground or attached to these brackets.

 

[mthompson]

jerryjay11 First let me apoligize for being off topic, but I'm trying to find out where to get the map that shows where you've been in your signature.

Definitely awning supports. Used them on last two campers. Awning supports rods could be extended to the ground or attached to these brackets.

 

[jerryjay11]

Go to https://www.epgsoft.com/VisitedStatesMap/

 

[mthompson]

Thanks jerryjay11, I appreciate your help.

Go to https://www.epgsoft.com/VisitedStatesMap/

 

[jerryjay11]

Thanks jerryjay11, I appreciate your help.

You're Welcome

 

[txtinman]

I'll check this out tomorrow.



Sent from my SM-G965U1 using Tapatalk

Roll the awning out completely, get a step stool, and check the very end of it. Supports should be there, slide out from the awning, twist, and hook to your brackets in question.

Well I didn't say which tomorrow.

LBR you are correct, but I believe Heartland installed the wrong hardware to support my awning. I don't know which is the correct part.

 

[LBR]

Well I didn't say which tomorrow.

LBR you are correct, but I believe Heartland installed the wrong hardware to support my awning. I don't know which is the correct part.


View attachment 61880View attachment 61881View attachment 61882

Slip that bracket in from below pushing up on that movable rod, push bottom of bracket flush, then let go.

 

[txtinman]

Slip that bracket in from below pushing up on that movable rod, push bottom of bracket flush, then let go.

Amazing! Thank you.

 

[carl.swoyer]

My 2018 RW426 has two of these mounted on the back. One on each side of the ramp. I can't figure out what they are used for.


View attachment 60502

View attachment 60503

View attachment 60504

View attachment 60505

That definitely an awning support.

Sent from my moto z3 using Tapatalk

 

[txtinman]

Re: Help me identify this part (SOLVED)

Yeah. I got it to work. I'm usually pretty good at figuring out how simple things work, but I was stumped this time. Thanks for the help.

 

[TexasUltra]

Help me identify this part (SOLVED)

My 2018 RW426 has two of these mounted on the back. One on each side of the ramp. I can't figure out what they are used for.


View attachment 60502

View attachment 60503

View attachment 60504

View attachment 60505

I'm happy your problem was solved. Now, where did you get the Caution wide turn decal? That is awesome!

 

[cookie]

You might try contacting Mark at Vinyl Your Way. He might be able to make that decal.
Mrcomer2000@yahoo.com

Peace
Dave