Guys, new to the group and appreciate all the helpful information on here. I just traded-in my 32 foot bumper pull on a used 2018 Big Country 4011 ERD and just noticed the slide in the kitchen that has the fridge and stove in it sits away from the wall on the top about 1 1/2 inches on one side and about 1 inch on the other. The bottom seems to be sealed good. When you bring the slide in it hits at the top way before the bottom. Also in the bedroom I noticed the bottom cable on one side has slack in it. Has anyone ever done an adjustment on these two slides? Thanks
Kitchen Slide Issue
- Thread starter Smuteye
- Start date
Welcome to this great forum.
It's normal to have slack in the cables of an electric slide.
Many of us have adjusted a hydraulic slide. You can find instructions on how to do it by clicking on the Tools button above. Or by clicking here.
Check out the link in my signature ance consider joining the Heartland Owners Club. It's free.
Peace
Dave
It's normal to have slack in the cables of an electric slide.
Many of us have adjusted a hydraulic slide. You can find instructions on how to do it by clicking on the Tools button above. Or by clicking here.
Check out the link in my signature ance consider joining the Heartland Owners Club. It's free.
Peace
Dave