On another thread here in the Forum, someone attached the instructions for re-establishiing the 'level' point for the Level-Up System. Since my unit was not level when I used the Auto Level function, I tried the process. It didn't work at all. After fumbling around for a solution, I called Lippert Customer Service. They were very helpful. It seems I needed to remove all power to the 'Brains' before I could proceed. Lo and behold, it worked.
As a side item to this, I also found out that resetting the zero point only sets the front-to-rear level point - not side-to-side. Evidently the side-to-side is permanently set in a module located under the rear of the 5th wheel and cannot be reset.
Thanks to Lippert for very quick response.
As a side item to this, I also found out that resetting the zero point only sets the front-to-rear level point - not side-to-side. Evidently the side-to-side is permanently set in a module located under the rear of the 5th wheel and cannot be reset.
Thanks to Lippert for very quick response.