Curt_Hinson
Active Member
Long story short. Had to maneuver around in a truck stop with a sharp turn to the left. My cable from truck to camper evidently got caught on the side of the truck. The turn was sharp enough that it bent the junction box under the hitch. I didn't know anything was wrong until I got a message "Check trailer wiring". I stopped and sure enough, my cable was dragging. I started the remainder of my trip from Gulfport, MS to Vinton RV, Vinton, LA. Raining like **** so had to drive slow. It finally dawned on me that I had no brake assist from the trailer. I finally made it to Vinton RV. Naturally, no help on Saturday or Sunday. I opened the junction box and pulled the cables out. To my surprise, the dark blue wire for the trailer brakes was just hanging there and certainly appeared to be broken off. There was a yellow wire hanging, but discovered that it was for the aux terminal. The problem is that I can't find anyplace that the broken blue wire came from going on into the camper. Does anyone have an idea what wire to connect to so that I will have brakes. There is a light blue wire, but that comes from the breakaway switch. I do not believe the dark blue wire connects to that one.
Curt
Curt