Bought a 2015 sunseeker 3170 class c motor home with all jensen tv's. When i go through the program cycle, it finds all these channels but when i go to select a single digit channel, say 2, 6 or 9, it comes up 15-1, 15-2, 32-1, 32-2, 32-3, etc. Why can't i get the single digit stations.
No single digit channels
- Thread starter MSTGANE
- Start date
With todays digital world there are now very few if any single digit channels.
After you have done an auto channel search, you will need to enter the channel number of the station you want, such as 6.1 or 2.1.
This of course all depends on whether or not there are any stations in your area with the lower designation. 2.1, 6.1, 9.1 etc.
Perhaps someone over at the Sunseeker forum will have a better answer for you.
Peace
Dave
After you have done an auto channel search, you will need to enter the channel number of the station you want, such as 6.1 or 2.1.
This of course all depends on whether or not there are any stations in your area with the lower designation. 2.1, 6.1, 9.1 etc.
Perhaps someone over at the Sunseeker forum will have a better answer for you.
Peace
Dave
danemayer
Well-known member
Hi MSTGANE,
With the conversion from analog to digital TV transmissions about 5 or 6 years ago, most channels now have a number like 2.1, 2.2, etc. If you press the #2 on your remote, many TVs won't find a channel 2 and are not programmed to assume that you meant 2.1. So they may give you an error.
In a few areas, there are still a few analog stations on the air that do have numbers like 2 or 6. But not too many of them exist.
Similar threads
- Locked