Oshkosh water leak

[gfnesbitt]

If you install a washer and dryer, it might be best if you lift up the bed, remove the left panel and check the flexible drain hose. Ours became completely disconnected on one end and was wedged under the bed and was also

loose on the other. Needless to say we had quite a flood. The drain pipe is actually too long and causes a lot torque on the flexible drain hose fittings when the slide goes in and out. See the attached pics. BTW, the hot and cold lines were reversed and all the plumbing next to a 120V junction box.


Sent from my iPhone using Tapatalk

 

[porthole]

You're not the only one. One of our NJ Chapter members had the exact same issue.

Might be a good idea for anyone with that arrangement of hoses under the bed to take a look and inspect closely.