Project LM 365

[Jesstruckn/Jesstalkn]

Well let's play what the heck is he up to now !!!
This if something on the new Ford not the Landmark.

Sent from my XT1585 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Here's a mock up
It will be made out of 1/4" steel.

Sent from my XT1585 using Tapatalk

 

[Oregon_Camper]

Not sure what the official name is, but I think it is a device to catch the king pin if you start to pull away and it slips out of the hitch....stopping trailer from crunching truck.

 

[Jesstruckn/Jesstalkn]

Good geuss but not even close..


Sent from my XT1585 using Tapatalk

 

[ksucats]

A step for the front so that you can reach in and check fluids (oil dip stick is way back on these things )

 

[jbeletti]

Something for inside the cab for Zoe.


Sent from my iPhone using Tapatalk

 

[Jesstruckn/Jesstalkn]

Nope
I just had everything cut out on this amazing machine at Nick Heckendorf's​.
Rich heckendorf's son. He has an extra awesome metal shop in Modesto.

I'll try to add the video soon.

Sent from my XT1585 using Tapatalk

 

[TikiDawg]

It looks like it will bolt to the frame to hold something that will be padlocked in.

Sent from my SM-G900V using Tapatalk

 

[Jesstruckn/Jesstalkn]

Getting wormer 😎

Sent from my XT1585 using Tapatalk

- - - Updated - - -

I like your guess Jim!!

Rhonda

Something for inside the cab for Zoe.


Sent from my iPhone using Tapatalk

 

[Mrsfish]

Getting wormer 😎

Sent from my XT1585 using Tapatalk

- - - Updated - - -

I like your guess Jim!!

Rhonda

Yeah, but Zoe is so little that the 1/4" steel is not necessary. Heck the cardboard would be heavy enough for her!!

 

[Jesstruckn/Jesstalkn]

Yeah, but Zoe is so little that the 1/4" steel is not necessary. Heck the cardboard would be heavy enough for her!!

LOL that's what I was thinking.

We're getting close

Sent from my XT1585 using Tapatalk

 

[Mrsfish]

Started thinking it was an elevated bed for me Zoe in the cab, but the mounts and tie down don't make sense. So we've moved on to thinking it is for the bed or the bumper....

 

[jbeletti]

Yeah, but Zoe is so little that the 1/4" steel is not necessary. Heck the cardboard would be heavy enough for her!!

Ah - on Tapatalk, I didn't see that was steel! I'm sure it will be something that you'll get much use from.

 

[Jesstruckn/Jesstalkn]

Ok it's about done so I'll take a break and fill you all in.
The new AMP Resurch Bedstep2 I installed a few weeks ago was way to far forward for my liking. This bracket I made will move the step back 10" from where it was. Now it is right in front of the fender. That's where it should be.
Here's a bunch of pictures for you to figure out what I did.

You seen the cardboard mock up earlier today

Now the steel

This is before. AMP's original mounting point.

This is with my bracket
10" farther back.

I have a few more holes to drill then send it out for powder coating tomorrow morning.

I'm pretty happy with the results ��

Sent from my XT1585 using Tapatalk

 

[Mrsfish]

Ok it's about done so I'll take a break and fill you all in.
The new AMP Resurch Bedstep2 I installed a few weeks ago was way to far forward for my liking. This bracket I made will move the step back 10" from where it was. Now it is right in front of the fender. That's where it should be.
Here's a bunch of pictures for you to figure out what I did.

You seen the cardboard mock up earlier today

Now the steel

This is before. AMP's original mounting point.

This is with my bracket
10" farther back.

I have a few more holes to drill then send it out for powder coating tomorrow morning.

I'm pretty happy with the results ��

Sent from my XT1585 using Tapatalk

i swear to the NCAA gods that I told Rick it had something to do with your step. I even went back in your posts to try and figure out what you could be doing to your step. I kept thinking it was some kind of platform to extend the size of your step, never thought of creating a new bracket to change its mount point. This was fun!! Keep it up!

 

[Jesstruckn/Jesstalkn]

You should have taken a guess you would have been close.
Maybe I gave up the answer to soon.
I'll have to come up with a new one.

Sent from my XT1585 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Here is a Video of the cool torch the Nick used to cut out my steel.

https://www.youtube.com/watch?v=y7JTQgFkWQ0&feature=youtu.be

https://www.youtube.com/watch?v=T16g1sELoEM&feature=youtu.be

Now is that cool or what ????

 

[jbeletti]

That torch was cool! Reminded me of our tour of MORryde in 2015. Way cool tools there too.

I like your step mod Jerrod. Nice job of making that step do what you want/need.

 

[Jesstruckn/Jesstalkn]

That torch was cool! Reminded me of our tour of MORryde in 2015. Way cool tools there too.

I like your step mod Jerrod. Nice job of making that step do what you want/need.

Thanks Jim
I sent the pictures and an email to Chris at AMP Resurch too. Hopefully they will make some changes to there current Bedstep2​ mounting and make it better for there future customers.

Sent from my XT1585 using Tapatalk

 

[ksucats]

Patent pending?