Project LM 365

[Bones]

Ya
It's direct power no relays, but being all LED I think it will handle it fine then once I put the dimmer remote unit in it will be eaven less amps draw. I'm wiring in the same dimmer unit that I used on the awning lights

Sent from my XT1254 using Tapatalk

Even if you had to use relays you could make a very small box and use the top hole for and still have it attached and the switch in the same location. I'm thinking kind of like a junction box with a small conduit tub attaching them both.

 

[Jesstruckn/Jesstalkn]

I think there's room inside the junction box if I need too or I could just use a heavy duty switch if I need too
You need to come to Vagas !!!!

Sent from my XT1254 using Tapatalk

 

[Bones]

I think there's room inside the junction box if I need too or I could just use a heavy duty switch if I need too
You need to come to Vagas !!!!

Sent from my XT1254 using Tapatalk

Yes Vegas is on my list of places to come and visit.

 

[Kenneths]

Jerrod, I have a question you might be able to help me with. Is it possible to pull an additional set of wires up to the ceiling over the sink area? DW wants me to put accent lighting around the wood trim similar to the rope lighting that is in the bedroom.

 

[Jesstruckn/Jesstalkn]

Anything is possible. LOL it just how bad you want it and how much damage your going to do in the process.
I think the a/c duct goes front to rear not sure how your is laid out.
Couldn't you grab power off of the light that are up there already.

Sent from my XT1254 using Tapatalk

 

[Kenneths]

But then i would have to have them on to be able to power the accent lighting, defeating the purpose.

 

[Jesstruckn/Jesstalkn]

If yours is like mine ?
I have 3 switches that operate 3 sets of light up there. You could combine 2 of those together then use the extra switch for your accent lights

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Think that might work ?

Sent from my XT1254 using Tapatalk

 

[2psnapod2]

I think there's room inside the junction box if I need too or I could just use a heavy duty switch if I need too
You need to come to Vagas !!!!

Sent from my XT1254 using Tapatalk

Jerrod you need to set up a time with Jim to put out where you can have anyone wanting to see them, go over all your Mods.

 

[Jesstruckn/Jesstalkn]

I hope I can get in LOL

We have talked about that a bit.
My door is open to anyone that want to come by and check things out.


Sent from my XT1254 using Tapatalk

 

[2psnapod2]

I just figured it would be better for everyone interested if you had a time posted. That way you would only be doing it a few times instead of all 150 of us stopping by at different times.

 

[Jesstruckn/Jesstalkn]

LOL good point


Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

I was envious of Chuck and Donna's new Big Horn's tail lights. They have a nice chrome bezel around em. So I jump on Amazon and found my own. FYI : they do cover the reflective outer ring of the tail light so I might put something reflective on the end caps of my hitch just for safety reasons.

Sent from my XT1254 using Tapatalk

 

[Bones]

you are getting fancy. Looks good

 

[jdamude]

I was envious of Chuck and Donna's new Big Horn's tail lights. They have a nice chrome bezel around em. So I jump on Amazon and found my own. FYI : they do cover the reflective outer ring of the tail light so I might put something reflective on the end caps of my hitch just for safety reasons.

Sent from my XT1254 using Tapatalk

Can you share the Amazon link?

Thanks
Jeff

 

[Jesstruckn/Jesstalkn]

See if this works I just did a quik screen shot off my phone if you need more let me know

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Ok another Mod
Just changed things a bit.
I popped the glass out of out LM 365 sign and removed the small strip of white LED lights.
Then install a long strip of multi colored LED's to surround most of the inner perimeter of the sign. I order the lights the receiver and the remote from superbrightled.com after hooking it all up using the USB, it wouldn't work. Using the AC/DC converter all worked well.

Sent from my XT1254 using Tapatalk

 

[oldelmer1]

I would like to update a few of my Mod's that work like a charm.

The pull out trash can... We Love it !!!! It is so much easier to use now, Another plus is you can still walk passed it with it open and being used.

The green indicator light for the fridge inverter. Give you piece of mind while traveling..... Good idea Jim B. thanks

The Lippert aluminum quad steps. What a difference they made... so much more sturdy then the stock steel steps were.

The bedroom reading light dimmer switches. Love them..... Its just nice to be able to set the lights to our preference.

The ladder box. It really turned out nice and works like a charm, It's there when I need it and out of my way when I don't....

From the last post the sewer gate valve at the end of the line.

And of course the Go Solar kit with the full coach Invertor. It is so nice to have everything working anytime we want it. (Power wise)

There are many more but you get the idea.

Hi Jerrod,
Where did you get the on/off dimmer switch from? great idea for the bedroom lights.

Thanks,
Tom

 

[Jesstruckn/Jesstalkn]

Jerrod, I have a question you might be able to help me with. Is it possible to pull an additional set of wires up to the ceiling over the sink area? DW wants me to put accent lighting around the wood trim similar to the rope lighting that is in the bedroom.

Kenneths Do you have 3 switches that control your kitchen and living room lights like I do ?

 

[Jesstruckn/Jesstalkn]

I had to get them from "RV Parts Country" They have the (Diamond brand) both of the Diamond brand switches worked perfectly. I tried 2 of the "JR Products" switches from Amazon with no luck. For some reason they would not work at all. But once i installed the Diamond brand switch exactly the same way it worked perfectly. The good switches ... (552154 Dimmer for LED Fixtures, On/Off, Black) Not good ones

552154 Dimmer for LED Fixtures, On/Off, Black $59.76 x 1 ​ $59.76​