Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Jesstruckn/Jesstalkn
Well-known member
It's actually just fine but it could be better. 
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
CarterKraft
Well-known member
It's actually just fine but it could be better.
Sent from my XT1254 using Tapatalk
that's what separates the men from the boys, perfection!
2psnapod2
Texas-South Chapter Leaders-Retired
Along with the price of their toys!
Jesstruckn/Jesstalkn
Well-known member
LOL
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Got my tire monitor system I'll put it on next week before we head to Tahoe then on to the Jackson rally.
Sent from my XT1254 using Tapatalk
I really should install this !!! I see I've had it sitting in the box since 9-3-15
Jesstruckn/Jesstalkn
Well-known member
There are some other threads started on here about some of that. I don't know about the ones offered with the Landmark. There were a lot of good things said about this set up. So I bought it.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Well I redid the BBQ quick-coupler mount and also replumped all of the propane lines in the side compartment again.
I remade the the bracket because when I made the first one the 3/4" holes were offset from each other. Can't notice it with 1 fitting in it but if I do add the second one you'll see it. Also drilled the mounting holes back a bit more to give me the extra clearance on the hose to frame.
I finally picked up a milling vise for my drill press which made lining the holes up evenly a breeze.
Look better ??
LOL
Sent from my XT1254 using Tapatalk
I remade the the bracket because when I made the first one the 3/4" holes were offset from each other. Can't notice it with 1 fitting in it but if I do add the second one you'll see it. Also drilled the mounting holes back a bit more to give me the extra clearance on the hose to frame.
I finally picked up a milling vise for my drill press which made lining the holes up evenly a breeze.
Look better ??
LOLSent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
My magnet switch's came yesterday, now I need to figure out where I want to put them. I think I'll try one with a LED strip in the basement.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Heartland sent me a new 50amp transfer switch, as mine is humming. I currently have 2-Surge Guard Transfer switches side by side. Now Heartland sent me a new one but it's a Furrion 50' amp basically the same thing but different look. That will bug me, but it will be behind the wall so I guess ill live with it.
I forget - did you install a Progressive HW50C? If not, then note that the Furrion "doesn't appear" to include any surge protection. I'd keep it as a hot backup
I've replaced transfer switches while camping. Not fun. But better when you're carrying a spare
Jesstruckn/Jesstalkn
Well-known member
Yes Jim I do have the in line progressive surge protector
I also have a 2nd Surge Guard in there for the Invertor
So the big questions
1) do you think I should make Heartland send me the right one ?
2) should I just install this one Furrion as the main switch ?
3) should I move the TRC Surge Guard over to be my main switch then use the Furrion as my secondary switch ?
?????
Sent from my XT1254 using Tapatalk
I also have a 2nd Surge Guard in there for the Invertor
So the big questions
1) do you think I should make Heartland send me the right one ?
2) should I just install this one Furrion as the main switch ?
3) should I move the TRC Surge Guard over to be my main switch then use the Furrion as my secondary switch ?
?????
Sent from my XT1254 using Tapatalk
Jerrod - If Heartland has switched brands altogether, I don't think there's any "making them" send you one they no longer have or buy. That you are protected with the Progressive, I'd change nothing "just because". However, you asked for one for a reason. So you may wish to change that one for that reason. Especially if Heartland needs it back for warranty recovery. Unsure what your arrangement was.
Jesstruckn/Jesstalkn
Well-known member
My original Surge Guard has some surge protection build into it. Jim said this Furrion does not. So if the Furrion is what there using now in there new Landmarks, does that mean there is no longer any surge protection build into them ?
Sent from my XT1254 using Tapatalk
Trust me - I have a very long email into the GM on this matter. I'll post what I find out in terms of the going forward plan and the result of the pitch I just made to them
Jesstruckn/Jesstalkn
Well-known member
Jim I have no argument yet.
I'm just unsure if replace the bad Surge Guard switch with the lesser Furrion is the right choice.
Are they no longer using the Surge Guard now ?
Does that mean the newer rigs are no longer surge protected ?
Sent from my XT1254 using Tapatalk
Jerrod - stop worrying. Seriously. Your Progressive EMS protects you very well. You are good to go!
It is not yet known if Heartland is replacing TRC with Furrion. We (you and us here on the forum) only know you received a Furrion as a replacement for a humming TRC. Let's not speculate further until we learn more from the plant.