Jesstruckn/Jesstalkn
Well-known member
I'll make sure I get into the right one 
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Jesstruckn/Jesstalkn
Well-known member
I'll trip you.
Besides I know I can run faster then Kelly right now. ♿
Sent from my XT1585 using Tapatalk
Besides I know I can run faster then Kelly right now. ♿
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Lookie what I got today😎
Big delivery truck for a small package
Sent from my XT1585 using Tapatalk
Big delivery truck for a small package
Sent from my XT1585 using Tapatalk
For20hunter
Pacific Region Directors-Retired
You are going to love them!!!
Rod
Rod
Jesstruckn/Jesstalkn
Well-known member
I'm sure I will. Between this and the new truck it will be a whole new rig
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Bones
Well-known member
Nice!!!!!Lookie what I got today😎
Big delivery truck for a small package
Sent from my XT1585 using Tapatalk
Lookie what I got today😎
Big delivery truck for a small package
Sent from my XT1585 using Tapatalk
So when do we get to see the install. Based on all your other post I would think your half way done already.
I cannot wait to see the end results.
Jesstruckn/Jesstalkn
Well-known member
It will be in November I think. I want to pull this trailer with the new truck first. To see if the drum brakes are really that bad of if it's is my GMC 3500 brake controller.
Then I will have time to do the job.
Also I will be cutting all of the brake lines and redoing them to the exact length. Titan guys installers just whines them up under there until it's the right length :/ I can't have that
That's one of the main reasons I'm doing it myself.
I will try to post it all ASAP
Sent from my XT1585 using Tapatalk
Then I will have time to do the job.
Also I will be cutting all of the brake lines and redoing them to the exact length. Titan guys installers just whines them up under there until it's the right length :/ I can't have that
That's one of the main reasons I'm doing it myself.
I will try to post it all ASAP
Sent from my XT1585 using Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
I have been making up several of my coiled 7-way light cord with junction box. using parts from my local truck parts house. I have finally found the junction box on Amazon and a 12 foot RV 7-way plug from etrailer.com
I installed 4 of them in Jackson
The Box = https://www.amazon.com/gp/product/B001RMGLIA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=
I ordered 3 of each to see if they will work.
The cord = https://www.etrailer.com/Wiring/WesBarg/WG54006-046.html
I have orders for 3 more right now.
I know somebody on this forum said that etrailer had the longer cords but I couldn't find them tell yesterday.... Thanks
I installed 4 of them in Jackson
The Box = https://www.amazon.com/gp/product/B001RMGLIA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=
I ordered 3 of each to see if they will work.
The cord = https://www.etrailer.com/Wiring/WesBarg/WG54006-046.html
I have orders for 3 more right now.
I know somebody on this forum said that etrailer had the longer cords but I couldn't find them tell yesterday.... Thanks
Bones
Well-known member
I have been making up several of my coiled 7-way light cord with junction box. using parts from my local truck parts house. I have finally found the junction box on Amazon and a 12 foot RV 7-way plug from etrailer.com
I installed 4 of them in Jackson
The Box = https://www.amazon.com/gp/product/B001RMGLIA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=
I ordered 3 of each to see if they will work.
The cord = https://www.etrailer.com/Wiring/WesBarg/WG54006-046.html
I have orders for 3 more right now.
I know somebody on this forum said that etrailer had the longer cords but I couldn't find them tell yesterday.... Thanks
Well that might be reason enough for me to switch out my cord. I had to put the old one back when I changed my pin box. How does the cord look when you have it hooked up in the bed Jerrod? Does it put a lot of tension on the plug in the truck?
- - - Updated - - -
It will be in November I think. I want to pull this trailer with the new truck first. To see if the drum brakes are really that bad of if it's is my GMC 3500 brake controller.
Then I will have time to do the job.
Also I will be cutting all of the brake lines and redoing them to the exact length. Titan guys installers just wind it up under there until it's the right length :/ I can't have that
That's one of the main reasons I'm doing it myself.
I will try to post it all ASAP
Sent from my XT1585 using Tapatalk
I can't wait to see these go on.
Jesstruckn/Jesstalkn
Well-known member
Dave the 12 footers I've been using work perfectly
They go straight from the box to the in bed plug, it has plenty of stretch if needed and won't catch on anything.
I'll see what the 3 new ones from etrailer look like when they get here.
Sent from my XT1585 using Tapatalk
They go straight from the box to the in bed plug, it has plenty of stretch if needed and won't catch on anything.
I'll see what the 3 new ones from etrailer look like when they get here.
Sent from my XT1585 using Tapatalk
You'll love the disc brakes no matter what you find with the drums. Actually wish I had the Kodiak stuff (I believe Titan uses Kodiak) as it uses the GMC brake pads and such. Much easier to find than the 'proprietary' stuff that Dexter (Heartland factory installed) uses. From what I read even the bearings are different. Regardless, you'll love the discs.
Jesstruckn/Jesstalkn
Well-known member
Excited about the brakes...
Here is a new version of my 7-way light cord
Version 7.0 LOL
This has a 3 way switch, 1) is for all lights on
Off
2) is all lights flashing.
This is mostly for the cool factor but could also be a safety issue if you needed to drop your trailer on the side of the road and run get parts.
I had to use a different flasher for LED lights
Sent from my XT1585 using Tapatalk
Here is a new version of my 7-way light cord
Version 7.0 LOL
This has a 3 way switch, 1) is for all lights on
Off
2) is all lights flashing.
This is mostly for the cool factor but could also be a safety issue if you needed to drop your trailer on the side of the road and run get parts.
I had to use a different flasher for LED lights
Sent from my XT1585 using Tapatalk
Love it Jerrod! I had to disconnect from my trailer on the side of I-40 in AZ this week. Could have used the flasher module.
Flying Dutchman
Virginia Chapter Leaders - Retired
Landmark owners without dishwasher.
Under the sink there is a Y-pipe for the dishwasher connection. For some reason they did not cap the open fitting, not sure if it was just mine or all of them. The open fitting is about 1 foot below the sink under the island behind the drawers. When the gray tank is full it overflows out of the spout under the island.
I looked all over Lowes pluming isles trying to find a cap, with no luck. Then I found this package of chair tips in the nick-nack section. It fit perfectly
You can get easy access to it by pulling the pass through drawer out to the table side then pull the second drawer toward the kitchen side and you will see the fitting.
Thank You Jerrod!!! We have been on occasion getting a terrible "grey tank" odor from the kitchen island, and thanks to your posting with pictures, we too found the "Y" drain fitting intended for the dishwasher to be uncapped. Easy fix once found, but it sure was driving us crazy. Hard to understand that Heartland continues to leave "open" a drain fitting when the dishwasher is not installed.
Jesstruckn/Jesstalkn
Well-known member
Glad you found it. And thanks for the reply on here.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk