Our north trail 31qbs
never came with 1 also, I just made mine
3 burner stove cover
Morning everybody.
I made a wooden cover for our stove. Sorry no pic's
I took a 1x3 ( accual size 3/4x2-1/2) and stood on side, attached 2- 15" wide shelfs (3/4" thick)to it and made one big cover to do the complete stove and area behind it.
TOTAL over all size is 30" long and 26" wide
I glued and screwed to the shelfs, 1x3s on 3 sides and left the front open as not to sit on stove top to damage it and have an area to lift it off. The shelve setup sits on the counter itself as I attached uprights to the very outside lip of shelve. The inside measurement is 23-3/4 inchs.
The area behind stove is a waste anyway and we always cook outside so this gives Gail a nice flat surface to work on.
The 2-1/2 inch height of the1x3s give the proper clearance of the burners and does not even rest on them. No way to damage elements or stove top. I put some little foam pieces on the bottom of uprights so it does not scratch counter.
If we do cook inside, we can lift off and put on bed untill . We will also remove from counter when we travel
I went to Rona and picked up a stain Called
Butcher Block, It's made to do cutting boards or any surface that will or may have food contact. A safety and sanitary issue with anything wood.
__________________
Irvin and Gail and 1 dog rascal W/ 7 grandchildren
2000 Silverado ext. 4.8 liter. w/3.73 diff
2009 31QBS
Calgary, Alberta, Canada
Last edited by irvin56 : 06-01-2008 at 09:34 AM. Reason: Forgot to add stain
irvin56
View Public ProfileSend a private message to irvin56Find all posts by irvin56Add irvin56 to Your Buddy List