travelincajun
Member
This is on a 2016 Bighorn 3270RS purchased new in August 2015 kept outside 24/7 until January of this year. Roof was cleaned using Dawn about once per year. Last week I decided to perform a good cleaning since I can not store the unit inside. I cleaned using Dicor Rubber Roof Cleaner last Wednesday. When I went up yesterday to touch up the sealant in areas I noticed the top surface of the roof was tacky/sticky on my hands and knees. I also identified several areas where the top surface of the roof was distorted but appeared intact otherwise. See pictures attached. There are probably a dozen or more of these areas. Some of these areas are where my knees twisted as I was scrubbing the roof with a medium brush and some are where the sprayer was located when I pumped up the pressure. I was planning to apply the Dicor Roof Protectant after the sealant cures. My questions are as follows:
1.) Are these areas where the top surface is distorted of a concern?
2.) Do I need to apply a patch to the areas where the top surface is distorted?
3.) Is there any concern with the tacky/sticky nature of the surface?
1.) Are these areas where the top surface is distorted of a concern?
2.) Do I need to apply a patch to the areas where the top surface is distorted?
3.) Is there any concern with the tacky/sticky nature of the surface?