Slide cable problems

Jakespoon

Member
2014 3755fl bighorn. Has anyone else had this problem of the pulley system pulling out of the wall. Upon looking at it it appears to have happened several times before. Looks like I’m going to have to plate it across a couple of studs to get it to hold. Thank you.
 

Attachments

  • BA17D017-DD5C-45C8-AA66-2686AA6136DF.jpeg
    BA17D017-DD5C-45C8-AA66-2686AA6136DF.jpeg
    349.2 KB · Views: 47
  • CF257FC7-28D2-4126-B7D5-D7DB8EA38531.jpeg
    CF257FC7-28D2-4126-B7D5-D7DB8EA38531.jpeg
    502.8 KB · Views: 46

Dahillbilly

Well-known member
Looks like you have a broken cable end in the second picture. The threaded end should have more threads for adjusting the cables.
 

Jakespoon

Member
Yes I do know that cable is broke it broke when the pulley system come undone and left slack in the cable. What aggravates me is the system pulling away from the wall. And by the number of holes it has happened before.
 

cookie

Administrator
Staff member
It looks like those are not the correct screws holding the pully system to the wall. My system has much heavier screws. Those look like the common screws used to hold aluminum trim, not for a system that gets the pressure of moving a slide.
When you repair it use heavier screws.

Peace
Dave
 

Jakespoon

Member
Thank you for the replies. Does anyone know what brand of cable system heartland uses or just any cable repair kit work.
 

SLO

Well-known member
Norco Accuslide is the cable system on my 2016 Bighorn. Also, my screws to mount the pulleys are much bigger than yours as well. Yours look #8 screws. Mine are #10 or #12s.


Sent from my iPad using Tapatalk
 

Oldelevatorman

Well-known member
I too had the assembly pull loose on one side. Tore right off the wall on the left side on my Landmark bedroom slide. I had it repaired and the mobile tech put thin plywood in the center where the cable dead ends pass each other. He thought they may have hung up on each other causing the one side to pull loose from the wall. Works like a champ now and it’s been well over a year and a half!


Sent from my iPhone using Tapatalk
 

Jakespoon

Member
I might try that when I get it fixed. It’s on the back burner and winterized for now. The local repair shop is booked through January. There is a mobile repair guy in town to but I still might try it myself if the weather clears up. Raining hard today.
 
Top