Slide Wire Support/Hanger ??

[cos]

Hey All

Wondering if anyone could tell me what these are called? I searched on the forum here and Amazon a bunch of key words of what i think they should be called lol but have come up with nothing. TIA

Sent from my iPhone using Tapatalk

 

[jnbhobe]

Just get a door hinge and screw it back together.

 

[Aandaar]

They are the Flexguard Kit W/100928

Heartland Part Number 16972 cost is $34.95 each.

I use to have a photo of it. If I can find it will post.


Sent from my iPhone using Tapatalk

 

[carl.swoyer]

Hey All

Wondering if anyone could tell me what these are called? I searched on the forum here and Amazon a bunch of key words of what i think they should be called lol but have come up with nothing. TIA

Sent from my iPhone using Tapatalk

On my 2012 Landmark Rushmore I had to re zippy tie everything.

Sent from my XT1254 using Tapatalk

 

[JohnDar]

Just get a door hinge and screw it back together.

I used a piece of an old inner tube to fix one.


Sent from my iPad using Tapatalk

 

[pjones1969]

Thanks for the reminder, my zip tie repair has failed so I’m on to the next solution, liking the hinge and inner tube ideas


Sent from my iPhone using Tapatalk

 

[Kathi-27]

go to landmark link and to mods section for jerrod's mod index. mod 93 really helped mine.

 

[Jesstruckn/Jesstalkn]

On my 2012 Landmark Rushmore I had to re zippy tie everything.

Sent from my XT1254 using Tapatalk

I can't see in the pictures what's on the other end. How much plastic is left on the pivot on the end ?



FYI Jim B. put a link to my Index on my signature. Thanks Jim

 

[pegmikef]

I used a piece of an old inner tube to fix one.


Sent from my iPad using Tapatalk

I used a piece of rubber from a rubber mat, doubled it, and gorilla tape to repair one on my Big Horn and it lasted at least 10K miles that I know of with lots slide in and outs. It was still working fine when I traded it in.

 

[ram_1955]

I used a strap hinge to repair mine. 3” on each side of hinge

 

[katkens]

I used a door hinge on mine and install was about 10 years ago.

 

[mlpeloquin]

Drill five holes, using a .200 drill bit, on each side of the break about a 1/4" from the edge of the brake. Use black wire ties to hook them together. I replaced mine the first time and it broke again. So far this allows it to flex and not brake again. Cheep fix that works.

 

[cos]

Thanks everyone. I ended up painting a door hinge black and installed, there was enough plastic left on the other end to get screws into. seems like it will work well


Sent from my iPhone using Tapatalk