Video Plug

[Loren1227]

My video plug broke where it connects to my TV. I can not access the back of the Furrion Audio component to replace the Video Plug.

I know I could splice the old plug and the new one I purchased but I would like to be able to just replace the old plug with the new one.

Has anyone been able to access the back of the Furrion CD/DVD/Radio without tearing the entire console apart.

We have a Sundance 189MB.

- - - Updated - - -

 

[Bogie]

Here is a link to the installation manual. There is a diagram on page 14 that shows removing part of the front plate to get access to the screws that hold the unit in place. Once you remove the screws, you should be able to pull the unit out.

https://cdn.accentuate.io/1925992448089/5237057552473/DV3300S_IM_WEB.pdf

 

[Loren1227]

Thank you so much I will check it out.

 

[Loren1227]

I was able to take the faceplate off but no luck unscrewing the screws. They are self tapping screws.

 

[Bogie]

I was able to take the faceplate off but no luck unscrewing the screws. They are self tapping screws.

Heartland usually uses square bit screws. A phillips screwdriver doesn't really work. You should be able to pick one up at the local hardware store. Looks like this:

 

[cookie]

Heartland usually uses square bit screws.

That would be #2 square bit.

Peace
Dave

 

[Loren1227]

That would be #2 square bit.

Peace
Dave

Thanks for all the information I appreciate it.

 

[Loren1227]

Update: After removing the faceplate and buying a #2 square bit the entertainment center came right out and simply replaced the 3 cords and now everything works perfect. $20.00 in cords and tools and the satisfaction of fixing it myself with a bunch of help from you guys.

Than you again.