Wet Bolt Installation

[SLO]

Good tool for wet Bolt Installation. Press new brass bushing in while pressing out old nylon bushing. I know there is cheaper was to do this with tools you have. But, there is no easier way. Especially for one person job. Harbor Freight.

Sent from my iPad using Tapatalk

 

[Razorbackfan]

You can rent the kit at autozone then when you return it they give you your money back. So it's free to use. Saves you from having to haul around heavy tools as there are auto zones everywhere.
http://www.autozone.com/landing/page.jsp?name=loan-a-tool

 

[Roller4tan]

slide the bronze onto the old bolt and gently tap into the spring eye to push out the old bushing and install the new one. no extra tools needed.

 

[shurack24]

I used a large C-clamp to press the bushings in to the spring eyes. Made a quick & easy job of it without risking hammering on the bushings in any way. Mashing out the old plastic bushings don't really matter at that point.