porthole
Retired
Well that might be a bit of a stretch.
The TST sensors have a small rubber disc seal inside the valve stem part. Every time you remove the sensor you should check that rubber disc to make sure it is seated. I have seen it not move, come part way out, come part way out only on one side and, get stuck to the trucks valve stem.
I use a piece of 1/4" air line scrap to reseat the disc. Perfect size and cheap.
So, that said, I cut up a piece of airline and will keep some in my truck.
Free for the asking at a rally near you (well,near for the north east at least).
The TST sensors have a small rubber disc seal inside the valve stem part. Every time you remove the sensor you should check that rubber disc to make sure it is seated. I have seen it not move, come part way out, come part way out only on one side and, get stuck to the trucks valve stem.
I use a piece of 1/4" air line scrap to reseat the disc. Perfect size and cheap.
So, that said, I cut up a piece of airline and will keep some in my truck.
Free for the asking at a rally near you (well,near for the north east at least).