PDA

View Full Version : LiteCylinder transparent LP Tanks



Bormo
05-12-2008, 09:20 AM
Hello,

does somobody use?

http://litecylinder.com/_images/cylinder_side_01.gif


http://litecylinder.com

Thank you

Forrest Fetherolf
05-12-2008, 10:59 AM
I had considered the Lite Cylinders............until I read this recall. Could be the problem is corrected...............

http://www.lpgasmagazine.com/lpgas/article/articleDetail.jsp?id=435013

Forrest

medic9016
05-12-2008, 12:29 PM
Over $100 each seems a little high for a propane tank. I think you could buy 2 30Lbs tanks for the same price.

Oldlthrneck
05-12-2008, 01:30 PM
I looked into them. Between the price and the recall, I stuck with the metal ones.
Fred

Bormo
05-15-2008, 02:09 PM
Currently we have deal from Canadian Home Depot - change empty metal 20lb to filled Lite Cylinder for $50.

Let's say - $15 for lp, so $35 is not so high from my point of view. But as result - less tonque weight and trust information...

I just not so sure that North Trail's tank holder compatible with it.

Upper side (around the valve) is about one inch wider...

But I think to try, and I'll post results here.

Bormo
05-25-2008, 07:55 PM
So results are negative.Bottom of these cylinders is not compatible with North Trail shelf.

chrispitude
07-07-2008, 09:05 PM
Thanks for checking this out, Bormo. This was going to be one of our first upgrades. It's unfortunate that they're not compatible with the factory hardware.

- Chris