Thank you for that information, I shall followup on it.
- - - Updated - - -
Can you provide me with more information? I did not know that there are metal framing supports within the back wall. How were the supports accessed ie was the back wall removed or were the welds accessed from...
....
The picture is the right rear back of my 2009 Sundance 2900MK and as you can see, the base of the back wall has vertically separated from the side wall for a distance of a foot or so.
Any ideas about:
1. What might have caused this separation
2. What is the likely fix for this problem...
I do the following:
1. I follow the same procedure as I do for putting RV antifreeze into the system ie. close the valve which allows water to be drawn from the on board water storage tank and open the valve which allows anti freeze to be drawn through a bypass hose from the antifreeze...
I have used a Swagman bicycle rack on my Sundance for a number of years now with no problems. Swagman sells a receiver hitch which is bolted to your bumper for attaching the rack to your RV.
If I attach a shutoff valve on the main waste water outlet and then open both grey water tank valves, will the water levels in both grey water tanks become equal?
I am interested in doing this when dry camping to create more waste water storage capacity for taking showers. Washing dishes in a...
Why do the replacement caulks not retain their color for as long as the caulking that comes from the manufacturer with the RV? Maybe I have been using the wrong one.
After 6 years of usage, approximately 2-3 months annually, the hot water tank in our Sundance developed a pin hole corrosion leak on the bottom of the tank.
I am disappointed with the short life span.
The anode rod was replaced whenever necessary.
I simply connect the hose which you normally use to winterize your unit with antifreeze to my water container and then connect the external shower hose to the water tank inlet.
Turn on the external shower and the water pump fills my water tank.
Works like a charm!
I simply use the hose which is used to winterize the system with antifreeze to suck up water from my 7 gallon container and then connect the external shower hose to the water tank inlet.
You asked about how to deal with a difference in length when lowering the landing gear. I initially dealt with this problem by going to Home Depot and purchasing door shims. They usually come in a package and you can use one two or whatever to place under the landing pad that has not yet reached...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.