Recent content by vicrider

Thanks Dan, much appreciated. Sent from my LG-K425 using Tapatalk

Water dripping out of the bottom of the rig right underneath the wh. Pulled the basement wall and saw no other obvious signs of leakage. Turned on the by pass and drained the tank. Turned on the water, no leaks. In big bend NP, so we'll have to go with the heat water on the stove and shower at...

Dan, this did it!!! This is how it goes. It works! Do you ever get to Oregon coast, SW Washington, or Tucson Arizona area? If you're ever in the sw in winter or the NW in the summer I'll buy you a case of beer, a bottle of your choice or a nice dinner. Thanks again, Scott Sent from my Z812...

Dan, sorry to keep bothering you but still can't get it. To make this go either way, i have to connect blue & red together and either green(up) or yellow(down). I have tried the jumper wires B&R in the positions on your diagram and the Y&G in the others, all I get is the solenoid on the ram...

Thanks Dan your always so helpful. I jumped it finally and got it so I can connect tomorrow! Thx again. Sent from my Z812 using Tapatalk

Tried to use drill in pump to move jacks but that doesn't do anything either. Sent from my Z812 using Tapatalk

So pump is running but landing gear not moving up our down. No fuses or breakers out. Switch is running pump. Any other ideas? Sent from my Z812 using Tapatalk

I have a 2012 3685 and the landing gear switch took a dump. The nearest parts place gave me a switch with 2 of the 6 connections jumped. That's fine there are only Blue, Yellow, Green and red on the trailer wiring. But seems in any configuration it's not elevating. I hear motors buzzing when...

I use the Porter Cable along with a Honda 1000 genny if on the hwy, affordable and efficient.

2002 Duramax SLT with 254,000 and pulling our '12 3585 all over the place.

I had 2 blowouts and 2 that developed blisters on the inside of the rims. I switched to geostar tires. Les Schwab ordered them for me. 235 85 16, 14 ply metal casing. My 3585 pulls so much better, way less sway in corners and wind. 3000 miles and no issues.

I just cut the coroplast, found the valves, Shot WD40 in where the cable goes in the valve, dumped some vegetable oil in each of the tanks, viola! They work again.

Re: No power at microwave outlet. It was in the junction bx under the kitchen slide, as you all thought. Thx HOC

Re: No power at microwave outlet. Quick update, this morning there was power on that line at the outlet, so go figure!! I hadn't gotten into the junction boxes under the slides yet, so I'm sure I'll run into it again down the line. I really appreciate everyone at HOC, and the great help that...

Re: No power at microwave outlet. Thanks everyone. I plugged the microwave into a separate source in the trailer and the microwave works fine. I took the outlet out of the cupboard and there is no power at the outlet. I took the panel cover off and checked the power at the breaker and that is...