Search results

That was my next move. I know the newer TV will weigh less than the current Legend because the weight of the newer ones is awesome. Thanks C&J

Trying to figure out what is behind the wall on my Oakmont 345RS. Right now there is a TV mount in the wall which uses 2 screws to attach mount to wall. Not sure what they are screwed in to. Is it a wooden vertical board or is it a metal vertical piece? The screws look to be wood screws but I...

It does. Thanks WB Sent from my SM-N920P using Tapatalk

Do the coaches have 110V bulbs, like in your house? C&J

So are there any lights that are 110v and mihht blow with a 12v led or are all lights 12v? Thanks in advance. Sent from my SM-N920P using Tapatalk

Thanks for the responses. C&J Sent from my SM-N920P using Tapatalk

Thanks everyone, totally answered my question. C & J

Thought I would try and drop this doc in here. I have it in two forms, word and pdf. It's regarding how to read tires (in general), codes and what they mean. Also, Sailun sizes and specs. I figure if I trust them for my 15,000 5th wheel, I trust them for my truck.

Welcome Charles and Bonnie. Hope to see you ar rally soon. C&J Sent from my SM-N920P using Tapatalk

Will check breaker panel. Hopefully will all be labeled. Thanks. C&J Sent from my SM-N920P using Tapatalk

Also need to add that one 30 amp breaker was thrown. C&J Sent from my SM-N920P using Tapatalk

Hello all - I have a 345RS Oakmont. I had a 5.5 Onan genny installed (dealer recommended size). Twice, i have fired it up and let it run for 5 mins or so, then turned on the front air, waited for it to cycle, blow cold air. Waited, emptied refridgerator, came back, front air still running, went...

Good deal, thanks. Sent from my SM-N920P using Tapatalk

I plan, once I am full time, to replace my OEM tank with a large one. I have found several that should just slip into place. I have heard that my fuel gauge needs to be "calibrated" to adjust to new volume. Is this a lengthy process or is it rather quick? C&J

Will do. Sent from my SM-N920P using Tapatalk

Hello All; I also have a Honda 3000is. I initially bought it in 2005 for a much shorter 5th wheel (25 foot) with 1 air conditioner and a gas refrigerator. It did a great job. The air conditioner was a small one. I graduated to the Oakmont and thought, well, we do boondock so why no keep the...

Hi ALL - has anyone taken the basement access panel off and put it on hinges so once you've cleared the way, just swing it open? I am thinking of doing a water filtration system and that is what I think I'll do. C&J

I have an Oakmont, there is a hot and cold drain point underneath the water heater, and then a single cold water drain behind the rear axle. I have no screens over small opening but i am not in an area that has that issue....yet. C&J Sent from my SM-N920P using Tapatalk

I've heard a lot of good things about the Oxygenics shower head. From water saving to better water sprayer due to design. I did a search on YouTube (as I do for most product reviews) and found this one: ---> https://www.youtube.com/watch?v=9Bs5qGdC0EA&t=323s The interesting part begins around...

Surprise of the century. At least for me. Pulled the fuse panel off the wall. Went to the wires that supported the water heater. LOOSE crimp. Yes, 3 weeks of troubleshooting. A poor crimp. I still can't believe it. While I was there I checked all the crimps and connects. Solid. Re-crimped the...

Excellent input, mucho thankies. C&J Sent from my SM-N920P using Tapatalk

Thanks for the replies. Will have to take a look and re-engineer my thoughts. C&J Sent from my SM-N920P using Tapatalk

Thanks for the reply, in the Oakmont, it is in the bedroom corner. I havent eyeballed the path straight down but it is either in the basement or the front compartment. Front compartment would be bad, that has my batteries and Onan with a metal floor. Once I figure out the straightest route I'll...

I had asked a question regarding the Splendide washer/dryer combo in another thread but I think it got lost within all the responses to other questions. Thought I would make thing a single item question. We are thinking of purchasing the Splendide washer/dryer combo unit but I saw a few...

Very cool setup. I do like the single unit washer/dryer. I have read where the drying cycle is much longer than with the single dryer install. I like the idea of one touch, set it and forget it though. And you still have room in the closet to store and hang. Win win to me. I was wondering...

So gang, is this the "wet bolt" swap out you've been talking about? If so, is it something that you can do just by taking the weight off the axle? Thanks in advance. C&J - - - Updated - - - This link ---> http://tweetys.com/wet-bolt-kit-2-14-shack-tande-1.aspx?gclid=CP3R6reX6NMCFYF8fgodluMMjA

Ops Manual says "OverFrequency - Code No. 14. Engine governor unable to maintain rated frequency. Corrective Action: See an authorized Onan dealer. C&J

Awesome idea. I think I will adopt that one. Thanks again. C&J

Does the converter have a cutoff or OFF / ON button or switch? I haven't been back inside the front compartment to see. C&J

Whew, that makes sense. Thanks for the reply. Eases my mind. The paper towel came back dirty black and grimy. Not sure what that means but I'll keep my eye on it. Thanks again all. C&J

Okay, will take a paper towel out there now. My fluid is not red though. The reservoir tank I was referring to is this one. I also notice that there is a clear line impression on the tank and the level of the fluid is below that. I've looked at my Lippert manual but didn't see anything that...

Thanks mucho. C&J

Opened up my front cargo area. I was going to inspect the batteries and make sure the hydraulic fluids were okay. Here is what I found. It appears to be leakage from either the reservoir or battery case. I honestly can't see where its' from. The hoses don't appear or feel oily and I haven't...

Understood. I'm thinking I just put this switch in the red position vice the green. C&J

When doing maintenance of the batteries, I know I should disconnect from shore power, but is there anything else I need to do? I want to pop off the caps and check water levels and terminal corrosion. Thanks I advance. C&J

Welcome to our Family. Janet and I hope to see you at a rally soon! C&J

Hapoy Birthday Mike, hope you have an awesome day covered in awesomesauce. 🎂 Sent from my SM-N920P using Tapatalk

Ran all the hot sided faucets until water came out before i turned on the 110V side. Multimeter is next. Sent from my SM-N920P using Tapatalk

Understand about troubleshooting. I have never used a voltmeter. I probably should invest in one quickly. I had gone through the Troubleshooting guide but didn't see anything that reached out and grabbed me as being wrong. Will let you know what happens next. C&J - - - Updated - - - I did...