Search results

I should add, I drained & flushed the tank and replaced the anode rod at least once per year.

We were full time for nearly five years.. water heater was on the entire time.

This looks very effective. I don't have pictures, but on my long crossbar (can be made any length) I used an adapter piece on each end that allowed me to push the legs into each side of adapter at a 45 degree angle (looked like a sawhorse when completed). The legs were about 6" long with an...

I built mine to drain from either end of the slide awning; it depended on which end I inserted first. In other words, I made the legs shorter on one end ... and yes, I never noticed any flapping. PS, I tried using a beach ball, but the PVC worked best.

Had toppers on our Bighorn, it was a great investment.... I did have that nagging pooling problem, so I made a support from PVC piping. A very easy project. I inserted the PVC whenever there was rain forecast or if we were parked for a longer period of time... don't glue the PVC joints and...

Actually, there is a good solution that is already in use in a number of places in Europe and California. Hydrogen powers converted diesel engines as well as new engines in trains and buses, and ships. Hydrogen emits zero polutants and is easily extracted from, among other things, water...

California is leading the world towards a toxic meltdown when all those battery manufacturers waste, and old battery disposals leak into the water, food, animals, and poisen us all...

Most of the manufacturer payload charts show the maximum payload for a stripped down truck.., don't use it for making your choice. My opinion is that your only choice is which DRW truck to buy....

Ceramic is a marketing term. However, the products are great. The magic ingredient is a polymer, not wax, that when applied properly, provides great results. The trick is to apply it with no sun for 12 hours. I used one called Rejex on my 2012 Bighorn. It was, and is absolutely the best thing...

The rally hosts certainly put a lot of time and effort arranging/organizing the chapter 'rallies'. You used the word 'Campouts', that while we were AZ members, the 'campouts' were much less formal and different than rallies. Attendees would determine any activities but generally would be pot...

This may seem counterintuitive, but condensation will occur with a lack of adequate ventilation. Open a ceiling vent or window to allow better air circulation.

Is there an advantage trying for mortgage instead of regular RV loan? We had no home, a 15 year loan, no affect on credit score... just asking: curious.

I don't recall where I got the diagram, but somewhere on the internet... also, I learned the best string to use was 100 lb test braided fishing line.

At your location, are you permitted to get one of those large propane tanks installed outside the RV?

All appliances must be changed over in order to be able to use natural gas, and not all appliances can be changed…. Check with manufacturers to be certain. I would also want to be certain that the piping and fittings used in the RV are compatible as well.

Why not just get a horse trailer with the camper package…. Those are really nice and designed for just that.

We tried by car a number of years ago by car. After a few hours of pure boredom we abandoned the idea. Too many trees, too few views.

A hydraulic repair shop can repair these. Price may be reason to replace instead of repair, but may be worth looking into.

Your ladder will not be a safe/secure way to hold a bike.

I ordered an extra set of the ladder stand-off supports from Heartland. My ladder was much stronger and more rigid after adding those. Also installed SS screws...

May be the mineral spirits as it’s petroleum based. In any event, never use petroleum based products to clean any surface your going to bond, seal, or glue; whether it’s Dicor or any other sealant.

Ann, congrats on your decision! Sounds exciting!

I’m not sure new rigs have more problems, but people tend to post about problems often, while those without issues don’t say much.

Gosh, the thrill of a new rig is always exhilarating! In the end, it boils down to personal preference. If you want it, you’ll always find reasons to rationalize your decision. Our last rig was used full time for five years; that’s 60 months, and pretty much trouble free. If you use yours...

Are they showing nylon bushings? I would Only use bronze bushings with wet bolts...

Above All good suggestions and advice. My career of nearly 40 years was in the bearing business. I taught many bearing maintenance seminars to factory maintenance and engineering personnel. The key to long bearing life is cleanliness/proper handling, and proper lubrication. Seals are key to...

Can speak only about Neverfail... I installed them shortly after purchasing the BigHorn new in late 2011. Sold the rig in early 2016 after traveling full time from FL to WA to OH, AZ, a number of times. No idea the total miles, but never had any issues with tire wear, suspension, etc... The...

https://manuals.heartlandowners.org/manuals/User%20Guides/KIB%20Multi-plex%20Control%20System%20V2.0.pdf

Just take your measurements to your favorite furniture store and get what you want. We did that a few years ago with LaZyboy recliners.

I had Neverfail installed just a few weeks after buying our BigHorn new. Travelled full time for five years and never had suspension or tire issues. Added note: I re-torqued all suspension bolts at least twice per year and always found a couple that needed tightening. I count that as a...

Leaving them out is likely fine, but I would exercise them on occasion to keep fluids and mechanical components in good condition.

Ours was swapped out with Lazyboy brand.

When we travelled full time I checked the torque on my bolts every few months for two years. I always found several that needed re/torqued. They finally set in. I never had any alignment, or tire wear issues in five years of full time travel travel. I had installed the Neverfail bushings...

I’ve just let mine hang from the pin box.... easy Peazy.... pull the pins, or release the pucks, depending on how yours is secured to the truck bed, then raise the nose and drive away... no extra equipment, no strain, no pain... done it many times. If you need to, you can also lock it up...

No damage, but we had a drawer under the oven that kept coming out. Fixed that with a short strap and snap. Sorry you had damage.

My Reese standard 24,000 lb capacity hitch mounted into the truck bed with four holes and a latch that was easy to release. I could release the latch on each side and lift the front of the trailer with the hitch attached and hanging from the pin box. Not a big problem for those times I wanted...

Any good glass business can make a replacement. They need exact dimensions, corner radius if applicable.

1983 lbs is the most important number... that means you will be grossly overloaded. I think the 2800 lb pin weight is probably a little light as well, as your trailer contents/cargo weight needs to be included. Also the contents of the truck; people, tools, hitch weight, etc.... I agree with...

We started by adding a 2” Foam topper, from Walmart, on top of the mattress. That was pretty good, but added another 2” and loved it... it was also a lot less money than other mattress options.

FYI - Directly Across the highway from KOA, walking distance, is a really nice dinner & show, Capone’s dinner & show. If it’s still open, a worthwhile evening.