Search results

I put my antenna in the front compartment so it is between the tire sensors and the monitor in the truck. Put the antenna between the sensors and the monitor.

If you contact Heartland Customer Service with your vin number they will send you plans for the walls in question.

What if you have a Class 5 hitch receiver with a 2 1/2 inch opening? What is the Hitch safe solution?

Johnson Control Center in Houston. Sixth Floor Museum at Dealey Plaza and Museum of the American Railroad in Dallas. Fort Worth Stockyards in Fort Worth. Galveston TX

Went out this weekend and had no over the air reception. Checked all the connections and that the booster was putting out 12 volts to the antenna amplifier. Climbed up on the roof and the coax cable had completely disconnected from the antenna. Reconnected the cable and problem was fixed.

I have a TST tire monitor. One of the tires was showing a higher temperature and pressure gain than the other three tires. Turns out that that tire has a bulge on the inside side of the sidewall. Wouldn't have reason to check without the monitor. Fortunately the tire didn't blow. Towmax...

TX does have emissions testing in select areas. Here is a link: https://www.dps.texas.gov/rsd/vi/consumerinfo/emissionTesting.htm

When I drag mine along, it is in the garage in the toy hauler.

I have a 2014 Torque 270HG with a tank on both sides behind doors that door not lock. I am able to lock the belly bands. Possibly the doors do not lock so that the valves can be accessed quickly.

Check the owners manual. There may be a brake/drive disconnect that may need be disengaged prior to manual operation.

I use Thule 821 Low Rider Bicycle Mounts attached to a 1x4 that spans the two floor tie downs in my fiver. No problem with two bikes.

I have had good luck keeping the sensors clean by dumping 1/4 to 1/2 cup of dish soap, 1/4 to 1/2 cup of laundry water softener (20 Mule Team Borax is an example), and 5 gallons of water prior to leaving the house or after dumping and flushing. Still use a black tank additive. Ice cubes also...

Not sure if this belongs here. We stopped for lunch and the spare tire was hanging down. It hadn't hit the gerund yet, but was close. The spare tire carrier is a style that cranks up and down similar to the spare tire on Ford trucks. Is there away to prevent this? How common is?

Love my airbags. Also had airbags on a Toyota Tacoma with a bumper pull. They level the truck and improve the ride.

Hello. We have a 2014 Torque 270 HG that we purchased new in March 2015. We really like the layout. Spent 6 weeks in it while we were looking for a house to move into. The only problems we had are that the license plate was mounted below the bumper. Lost it the first trip out due to the...

Unless you can safely get the bed down on the rails and re-time the chains I would bring it to the dealer, especially if it is still under warranty. The dealer said they had a tough time getting the bed down to re-time the chains.

The sofa cushions kept sliding out. Went to Lowes and bought a roll of industrial peel and stick Velcro tape. Put a strip front to back under each cushion, problem solved. The Velcro said it wasn't recommended for fabric, it seems to be working fine.

Thanks. Does the outside left work for over the air?

Where is the connection point for cable/satellite TV connection on a 2014 Torque 270 HG to hook up to park cable or a satellite dish? Thanks.

Its not quite free advertising, the frames cost money as does the hardware and time to install. Also, how many dealer frames stay on - could be the dealership wants to spend their advertising dollars in other ways. My dealer didn't put a frame on either - would have been lost the first time...

1/4 carriage bolts with washers and self locking nuts work well as do lock washers and regular nuts. the square part on the carriage bolt will keep the head from spinning when inserted through the license plate bracket from the back.

I ended up putting the top of the hold open on the door at 7/8 inch rather than 1 1/4 inch. At 1 1/4 inches the door wouldn't close. Cabinet openings are 22 1/2 by 9 inches , doors overlap frames by 1/2 inch.

Found some cabinet hold opens at Camping World today. They are made by RV Designer. CW had three different styles, similar in operation. From RV Designer Customer Service: Thank you for contacting RV Designer – I’ve noted your suggestion to include the pictures on our website for our next...

Pictures of the retrofit for the license plate as suggested by the dealer. Unfortunately Heartland only funded the warranty request at a level that the dealer could cover the parts. Did the install myself with directions from the dealer. Sorry the pictures are upside down and sideways. Even...

I haven't found anything yet, just came up with the idea today. We seem to remember that we had them on a Jayco TT that we sold almost three years ago. The FW is new to us and we didn't have an RV in the interim. I think Camping world may have a solution. I looked at Rocklers(on line), they...

I had Firestones on my Tacoma with a bumper pull. I have them on my F250 with a fifth wheel. Improves the ride and levels the truck. Don't over inflate, just enough to bring the truck back to the level before hitching up. Watch the minimum inflation. I had the Firestones installed on my...

Add a toilet paper holder. Add hold opens for the cabinet doors that open upwards. Mount the license plate on the door so that it is not below the bumper. The wind took my license plate off the first time out. :)

If you have a B&W Turnover Ball they make a hitch called a Companion that replaces the ball with a fifth-wheel hitch.

When I picked up my fifth-wheel the dealer turned of the breaker for the 120v hot water heater and said don't turn it on until you are sure you have water in the heater. Best way is to open the relief valve until water comes out. He also said when you drain the hot water heater trip the breaker.

My 2014 Torque 270 HG came from the factory with the lower limit switch set too low. The bed tried to go below the rails that the bed rests on when it is lowered. This caused the chains to skip a few teeth on one side, causing the bed to raise and lower unevenly. The result of the bed moving...