Search results

I can only answer this question about the location of the transfer switch since...I found mine today. It is accessible through the front storage by removing the middle panel (same one that the vacuum is on). Found it by following the big shore electrical in. BTW, I have a 2010 Road Warrior.

Well, I'm starting to make headway...here is the floor (I wound up moving the tile at the toilet up more though to change the stagger effect...I'm spacing it every 8"...I was going to do herringbone but the floor is too small to really appreciate the effect :) (the image is sideways again for...

Thanks for reading this... I'm on an overhaul of the bathroom on a 2010 Road Warrior 305 and took apart the frame of the doorway to the bathroom via the bedroom since it was easier and will allow me to fit a 2' tall galvanized tank (3' diameter) as my new shower platform. Now that I'm looking...

All righty, thanks for the insight!

Okay, thanks! (I had an AC installed in the forward compartment/bedroom, but it is separate from the main AC in the living area)

Gee, shouldn't it be covered then, since it's a hot wire?

I'm redoing the bathroom and took apart an interior wall (so that I could fit a tub inside). When I got the panel off of the wall, I found wiring inside that wall. This wall also houses the pocket door, so it is very odd that I would find wiring inside of it. These two sets are taped to each...

Well, I've got it apart and am getting a better vision of what to do. Here's the bathroom currently :) . (which the computer decided to flip sideways)

I found that pipe, it is behind the toilet on the other side away from where I want to move the sink. So, I'll likely cut the pipe, turn it toward where I want the new sink and go from there (using the vent system it has now). Thanks for the help!

thanks! And should I use this drain for the shower, I'll need to shorten the pipe below the flooring and retain this vent?

I've got a 2010 Road Warrior where I'm redoing my bathroom with the intention of removing the sink but keeping the drain as my new shower drain (or just cap it and keep the old one). I've now noticed that the drain seems to have a vent on it under the sink, I thought that would have been...

Eek...I'm watching this thread since I was told by my RV storage neighbor that opening the fresh valve and blowing with the compressor through the city inlet would build pressure to push all water out, but I'm in Texas so freezes only happen briefly, so was low concern.

Well, that would be better except (and I hope I don't sound like I'm arguing, I'm just dialoguing so bear with me)...my emergency brake line caught on my coupler once when parking it. At first it seemed like the transmission had gone out in my 06 Dodge 2500 5.9, and I was nervous to say the...

The extension cord and wind would scare the bejesus out of me...I don't care how much one thinks they might have secured something, that creates way too many variables that are way too awful in my mind.

Hi, thanks for reading this...here's my progress and questions, I'm hoping that some of you may be able to offer insight or other options I didn't consider (this is a 2010 Road Warrior). I would ask these of a contractor but RV life is very different than standard homes so...: 1. I'm removing...

Ah, have not noticed any slow draining... non-issue for me then :) (there is already enough on my list to do!) Glad I'm not the only one with a burping sink :) . And thanks for the info about the venting...I knew about that (it's like a house in that way, the roof) but...one never knows about...

Thanks for reading this...my question is that I have noticed a time or two when using the shower that my bathroom sink will "burp". At about that time, I will realize it had been a while since I released the water from my tank. Is this by design, that it will give me a warning? I'm...

Ugh!!! Alternative to this shower like farm trough Sent from my iPhone using Tapatalk

Tapatalk stinks on iPhone...anyway... Pulls away from wall. Going to find a Sent from my iPhone using Tapatalk

I'm working on mine now...ugh...it does have the support but the seam of the platform pu Sent from my iPhone using Tapatalk

Good idea, I'll follow up with some next time we're there...may help others in the future.

Not a fix for your furnace so ignore this if you are really wanting it to work. But, I circumvented my furnace problems (after having trouble with it running and seeing how inefficient they are anyway) by using space heaters on power strips with breaker switches. (My furnace problem may have...

All set! Behold...The Bulldog 10,000 lb dual motor landing gear! It wasn't a direct fit since the bracket was bent upward from previous owner drop (our friend welded together a jig and using the pressure of the frame, brought the bracket back down by turning a screw on the jig). This was to...

It's amazing what one inch of metal can do! (Well, that and likely the inch of metal on the other side as well :) I'm moving on to that one today to remove it...)

Yes sir! (and thanks John D for the return/space bar tip :)

Yes, one of the bolts was loose...glad we did not find out in an even worse way what could have been! We decided to replace with bulldog dual motor 8000lb via etrailer (paid more than eBay from another seller but cjnsuerjng their outreach, had to support them.) btw, my boyfriend paid for them...

Yup,(ugh-what-is-up-with-this-website-not-letting-me-use-my-space-bar-switching-to-phone)

Ugh-this-dumb-website-gets-stuck-on-not-allowing-spaces!!!----Anyway,-the-picture-is-there,in-my-post-but-I-don't-know-what-it-looks-like-on-tapatalk.(but-I-did-view-it-on-my-phone-and-now-on-my-computer)

This is the following leg, I plan on having the lead leg out tomorrow to see the condition of that one! (This is from a 2010 Road Warrior). Btw, accepting advice in regard to what to replace it with, thanks!

Yes-it-is!--(website-won't-let-me-put-spaces-right-now,I-tried-reloading)

I'm problem solving and researching and came across this thread and so...here is my 2010 Road Warrior 305. I love it, but it needs A LOT of attention. I bought it a year ago to live in, and now it is going to race tracks and beach weekends (this was just this past weekend for New Year :) -

Thank you! I know now not to chase a breather problem...but am wondering about the ground-bonding alligator clip? Sounds like a hazing joke. :) Other than that, I will peruse your Onan link from your signature, thanks!!! - - - Updated - - - "One of the steps for code 36 is replacing the...

Ugh!! Carbs! I'm avoiding that since I have run the engine just fine at one point since it did sit. But, it is on the waiting list. - - - Updated - - - Wow, that is going to be VERY helpful, thanks...I'll take a look at the lines (it says that the return should follow the fuel :) . This...

Thanks, we did that one..so, maybe the fuel pump is next? (and so no, there's no breather hose that allows the pressure to be released? Thanks!)

We have an Onan 5500 that will start, but sort of sputters and may stay started, but may also shut down after a couple of minutes or so. We are starting to suspect that there must be a kinked breather hose. The reason why we say that is because we emptied a lot of gas from the tank (we have a...

There is a way to check to see which code it's throwing, I don't know right now and am currently on my own generator problem, hence my interest in this thread. So, if I remember, I'll search it up again but now need to move on to my sputtering generator. (so, expect a thread of my own soon, LOL)

Guess I should mention, we made it! :) Well, had lots of guardian angles looking out for me. 1. Only had to reverse once with the RV but at least it was a huge area to do it in 2. A bridge that lets you go under on one side, does not mean it will let you for the other lane when you're...

Hi, thanks! Here I go.. What kind of tires? Goodyear Marathon How old are the tires? 1 year What is the weight range of the tires vs. the weight of the trailer. They're E rated so...I hope that's enough of an answer since the only weight I've paid attention to is the payload that results on...

Hi all, Well...after living full-time in my 2010 Heartland Road Warrior since August, I'm going to up and pull and go to make it live up to it's name. I will drive it to Rochester for a visit, then return. I will be traveling with my adventurous and trusting mother. So, any input for a...