lippert

Hello, I'm trying to hunt down the source of a hydraulic leak that. I'm seeing fluid accumulate on the outside of my hyd lines. I've wiped them down several times but the fluid keeps appearing. The rig has not moved/traveled, but I have adjusted the level from time to time. I am seeing...

Having problems with the LED range hood light on my 2020 Mallard M301. The light has 6 leds. After about 5 minutes one bank of 3 leds starts 'flashing'. Went to the Lippert Customer Care Center and asked about a replacement light. They inform me that they do NOT have replacement lights for...

Dealer is unable to fix Lippert Level Up system! Originally I was unable to raise the two rear sets of jacks of the six point Lippert Level Up system on my 2015 Heartland Cyclone 4200. I called Lippert for technical support help. They emailed me a troubleshooting manual; was having freezing rain...

Brand new member - with a brand new 2022 Bighorn Traveler 35BK with a Lippert 6-Poing Leveling System. I'll try to explain this in as few words as possible. Got home from the dealer, backed down my driveway and attempted to disconnect the coach. Got an "Excess Tilt" message when I tried to...

Has anyone with a bed tilt system had issues with the system stopping working? We have a new 2021 cyclone 4006 we got last summer. We’ve had issues from the start getting the slide to move in and out once we lift the bed. We have to press into it to engage what I think is the sensor. However...

So, I’ve got a 2018, 429. Since purchasing I’ve had an issue with the Lippert system. After leveling up the front jacks leak all the way down while putting the slides out. Dealer has tried everything. They replaced the front jacks twice, a few solenoids, and a handful of other things. Lippert...

Have a new 5er and looking to install the JT Strong Arms on it. I've been trying to find more information about the connection to the rear electric stabilizers (Ground Control 3.0). Lippert says I need 2 x $59 adapters (#314592) for the rears, but I can't figure out what they do or where they...

Upper Deck Frame Cracking Under Bedroom Floor I have an 08 Bighorn that I have owned for about 2 1/2 years. Just love the trailer and has been good times on travels. No issues and the wife and I have enjoyed fixing it up on the inside. Coming back from our fall vacation hit some pretty ruff...

I have another question, our camper didn't come with screen doors. I would like them and I have contacted Lippert and they don't just make the screen for my camper. I have to buy the whole dang door assembly for $750 a pop. :( Is there any other options that I could do so I can have a screen...

I'm new to 5th wheeling and recently bought a Bighorn 5th wheel with a 6 point Levelup Lippert lift system. I read in the owners manual that I should move my RV at least every 3 mo to prevent flat spotting of the tires. Since my storage lot was snowy and muddy in spots I decided to use the lift...

Hi All - I thought I would take a poll on upgrading to a Flexair Pin Box. Living in Cali we have more holes in our roads then smooth and flat. That doesn't include the launch sites at every overpass crossing. I thought a Flexair would help the rig and the ride. Thoughts from the community...

put new springs on the 5er and was told for the 7000 lipperts the 6 leaf 25.25 Double eye springs are the largest weight capacity at 3500 that I can buy, the reason I even bring this up is the old ones looked very wore out looking like a W when they are weighed down so I put the new ones...

I've got a 2012 Cyclone 4014 with what I term "dumb" landing gear (not auto leveling) - the front is hydraulic, tied to the three slides and rear is electric stabilizers. When I depress the switch up front to raise the front of the trailer in my driveway, it usually trips multiple times. I...

Does anyone have advice on how to adjust the slides to stop the carpet from being crushed when the slide is in? I assume that I should raise both front and back adjustments, but it really didn't seem to make much of a difference. It's also important that the gaskets are making good contact on...

We have a 2011 Sundance 3100ES. It included two Seat Tech Euro Leather chairs and ottoman's. One of the chairs broke where a metal bracket is attached to the outside U-shaped black wood (laminate?) frame. I tried to order the piece that broke but was told that I need to order a new chair...

Hey everyone, My DH and I are camping just outside of Corpus Christi, TX, in Riviera. We are having a few problems with our '11 Grand Canyon that we need addressed while we are here (when it rains, it pours), and I am looking for any positive or negative experiences you may have had with either...

Last week (Wednesday) on the way to the Nashville Rally, we had Level Up installed on our Cyclone in Goshen by Trailair. We then proceeded to Nashville and the system worked great. On the way home (Sunday), we stopped for the night and found the system inoperable. Shortly there after, we...

A large percentage of Heartland product owners know that Lippert Components is a significant supplier of RV products and that Heartland buys frames from Lippert and a good measure of additional componentry. Have you ever wanted to obtain something for your RV that you've seen us use on our...

Wanted to share our experience regarding pin box maintenance. Upon preparing the Bighorn for the upcoming travel season I noticed some rust had formed by the pin box. I contacted Heartland Customer Service for their expertise as it appeared that the pin box had moved from it's original...

I have posted 2 PDF files in HOM (Heartland Owners Manuals) for the optional Lippert Electra-Hydraulic Leveling system for Landmark. One of these documents contains pictures of the control panel. Note that these images and sequences may not match up with earlier versions of this system. Jim

Last summer I had a serious leaf spring breakage in Oregon. Lippert replaced them with 3 leaf springs, the same kind that broke, and I only lost 2 days on the road. Unfortunately, Lippert only reimbursed me $65 for a brand new Goodyear 614 $315 dollar tire, and told me they don't warranty...

Over the last few months, I’ve seen a lot of people complaining about their experiences with their dealer, Heartland, and Lippert. So, I’ve decided to share mine. However, instead of being disappointed, we’ve have been amazed at the support these three companies have given us. First, let...

This is a new system I saw being put on the new Keystone Fuzion toy haulers as an option. Has anyone seen one in person and am wondering what exactly they do. Is there a hose stowed so when you swing out the boom it pulls out? If you still have to attach a sewer hose to the end I don't really...

Great Service from Heartland and Lippert This weekend the shaft coming out of the off-door side front jack broke in two:( right where the screw attaching it to the square cross shaft goes thru it. I called Heartland Customer Service this morning who put me thru to Lippert. Gary at Lippert was...

I need some help here from you experienced 5th wheelers. I bought a new Dodge 1 ton DRW with a long bed which required the purchase of a new hitch, B&W Companion. The old truck was a Dodge 3/4 ton short bed with a Pullrite SuperGlide 18K. (I was told by PullRite that the SuperGlide brackets...

Just a note to let everyone know. Lippert was unable for some reason to inspect our unit at the Elkhart Rally. At the time I had two springs flattened on the rear axle, one on the front axle and the other spring about half gone. I took the unit to my dealer S&S RV in Farina, Illinois. They...

It looks like I have joined the spring chicken crowd. I don't like the looks of my leaf springs and I'm afraid to trust them for another trip. Especially after what just happened to Larry & Deb. We're still under warranty and when I called Heartland, they told me to deal directly with...

As some of you know, Lippert provided a free service to all rigs at the Rally. They inspected all rigs at the fairgrounds and wrote a report on each one. We for one had to have our leaf springs replaced because our original ones were “flat” per Lippert. They replaced them at no charge. To be...

More product mods for our toys....... http://www.lippertcomponents.com/index.php?option=com_content&view=article&id=66&Itemid=54 Forrest

There has been historical chatter about Lippert frames having a "limitation" of GVWR, and some manufactures have addressed this with reduced weights in order to not stress the frames. I notice with great interest that the Augusta has a gross weight of 16,200 and a net weight of 12595 with a pin...