farside291
Well-known member
I know this is an old thread but I just finished this weekend installing the MOR/Ryde wet bolt kit and X-Factor cross member and I have found that the bolt which goes to the alignment cam for the correct track are welded together. On my BC their is no ability to change to a wet bolt at those locations without replacing the OEM welded cam with an after market one. I called MOR/Ryde and was told they had never heard of the cam and bolt being welded together, but it is on my 2015 BC. I was only able to replace the center hanger bolt and the bolts and hangers for the springs.
And, I just spoke to Lippert, he said they do not weld the bolts to the correct track...anymore. The part number for the cam is 2907312 and costs $5.95 each. He advised not to change it if they are showing no signs of wear or damage. The correct track cams and bolts have a bronze bushing and do not use the never fail bushings.
And, I just spoke to Lippert, he said they do not weld the bolts to the correct track...anymore. The part number for the cam is 2907312 and costs $5.95 each. He advised not to change it if they are showing no signs of wear or damage. The correct track cams and bolts have a bronze bushing and do not use the never fail bushings.
