A few months ago we noticed our surburban hot water heater had a trickle of water inside the propane canister. I saw a small pinhole. I put a small screw in it and then put some JB weld over it as a temporary fix until we get back to the USA. Well, started leaking again.
The anode rod was good when I moved in June to a new campground, but by August I had a leak, checked the rod then and it was almost 99% gone. I was told afterwards that this one campground had hard water issues. Put a new rod in and its still good.
How do I find out what model it is? I am guessing a 10 gallon.. Can the "tank" be bought seperate as my electronics and gas stuff is working good.. just a darn leak.
I know I need to replace the tank, but if I can replace just the water tank without the electrics, it would hopefully be less painful to the pocket book..
Thanks
The anode rod was good when I moved in June to a new campground, but by August I had a leak, checked the rod then and it was almost 99% gone. I was told afterwards that this one campground had hard water issues. Put a new rod in and its still good.
How do I find out what model it is? I am guessing a 10 gallon.. Can the "tank" be bought seperate as my electronics and gas stuff is working good.. just a darn leak.
I know I need to replace the tank, but if I can replace just the water tank without the electrics, it would hopefully be less painful to the pocket book..
Thanks