caokgafamily
Well-known member
We arrived yesterday at Jellystone Park in Madison Fl, the kids were real excited. I Put the bighorn in my spot and told my youngest daughter to let the slides out. Everything was going good then I heard a loud pop and yelled at here to stop. The door behind the sink on my 3400 got stuck between the slide and wall. The forward track kept turning and caused the lower skirt to bend and push out, and it also caused the slide to bind. The cabinet door is ok , it just bent the hinge. The lower skirt I can fix. My question is how do I adjust the slide back. It needs to still go out 1 inch on the forward side, the other side is good. After this took place I ran the slide in and out 3 times to make sure it was ok. But it still not all the ways out on the forward side. This is the FP, Tv slide I'm talking about. I should have checked the cabinet doors before running the slides.
Thanks,
Steve
Thanks,
Steve