Lippert Equaflex maintaince question

[wingfoot]

My lippert equaflex system appears to have grease zerks (two)...I've looked and can't find any info as to greasing..If anyone knows the procedure and the frequency please let me know..
Also, if anyone knows the torque specs. on the equaflex system or where I can find a manual..

thanks in advance,
Larry

 

[SPY9]

I have the same question. Hope someone will answer you.

 

[JohnDar]

I haven't done mine, but I recall reading that they should be greased periodically, probably with the same frequency as wheel bearing maintenance. But it requires jacking the trailer up and manipulating the wheels around in order to line up the zerks with where the grease is supposed to go.

 

[L8APXER]

I believe you are talking about the axles made by Dexter. Their website has all of the information you are looking for. Look Here

 

[cookie]

I try to grease my Equiflex, along with the wet bolts at about 1,500 miles.
Maybe overkill to some, but grease is cheap and it only takes a few minutes.

Peace
Dave

 

[aatauses]

I now have a center point system on our BH, however when I had the equaflex, I greased them about once/quarter.
al

 

[wdk450]

I try to grease my Equiflex, along with the wet bolts at about 1,500 miles.
Maybe overkill to some, but grease is cheap and it only takes a few minutes.

Peace
Dave

Or you could replace the bushings with Reico-Titan Never Lube Lifetime Warranty bushings, and not have to grease the equalizers again. Here's a link:
http://www.riecotitan.com/flyers/bushingflyerwebc.pdf