Living Room Slide has large gap

[larkinstuart]

When we were in Gillette the tech. adjusted that particular slide. Now I noticed that when we slide it in there is about a 6 inch gap between the slide and the floor. Anyone have any suggestions on how to adjust that.

 

[danemayer]

A 6" gap sounds huge. Can you post pictures?

Was it that way when the tech finished in Gillette or is this something that has developed since then?

 

[larkinstuart]

No, it was not that way when the Tech finished. Noticed since we have been back. Will take a picture.

 

[jimtoo]

Take pictures from inside,, floor level and others and outside with slide closed.

Jim M

 

[larkinstuart]

Sorry guys, might be awhile for me to figure out how to get my smartphone to transfer the pictures to my computer. Working on it.

 

[larkinstuart]

 

[larkinstuart]

 

[larkinstuart]

I finally got the pictures on. I didn't see anything on the outside. Before the tech got a hold of it, there was a gap on the outside, now the slide is closed tight, with the exception of the inside. Looking in the inside, only the right side is lifted up.

 

[danemayer]

I'd suggest taking it to a dealer not just to have it adjusted, but also to find out why it changed. Something caused it to need the first adjustment (unless you have a brand new trailer), and something has caused it to change again. You need them to figure out what's causing the changes.

 

[wdk450]

I am wondering if how it sits inside with the slide in doesn't matter much, just how well the outside is sealed against the elements.