Modification Planning - Specs needed

[DRGalligher]

Are building plans for Bighorn's available? What we are looking for is a plan that shows the studs, wiring, plumping placement, etc., to be used in planning modifications. Thank you.

 

[Garypowell]

Someone else might know better or have some information but you'll have to call Heartland. But what I think you'll find is they will not release them to you due to trade secrets.

I know they have some jigs and fixtures to control certain parts but I think there is a lot of "as built" area's too.

 

[DRGalligher]

Gary,
Thank you for responding. We are not looking to change the structure, only to run wires from WIFI antennas mounted on top, and mount a router, inside the unit, for work related activities. What's the big secret?

 

[MTPockets]

I would think for a specific job, they would tell you what will help. Give 'em a call.

 

[SeattleLion]

You can probably locate the wiring in a cabinet and moun the antenna on the side of the cabinet. No wiring will show.

 

[danemayer]

This thread from a few years ago may be helpful. Jim Beletti documented his installation in a Landmark. Post #6 includes an attachment with details.

 

[donr827]

I would think for a specific job, they would tell you what will help. Give 'em a call.

I was able to get the stud layout for my trailer for a small section of the trailer but it was like pulling teeth from a tiger. I do not think it is trade secrets but for liability reasons..........Don

 

[Majestic]

Dan, one of the things I like about HOG is the sharing of info, take or leave what you need. In looking at this post, the thread from a few years ago by Jim, I don't see the attachments anywhere in the "Tools" section. Some of the ideas that Jim had are usefull. Am I missing a step in my searches for info or did Jim's article not get posts under the manuals? Thanks

 

[danemayer]

Dan, one of the things I like about HOG is the sharing of info, take or leave what you need. In looking at this post, the thread from a few years ago by Jim, I don't see the attachments anywhere in the "Tools" section. Some of the ideas that Jim had are usefull. Am I missing a step in my searches for info or did Jim's article not get posts under the manuals? Thanks

Gary,

There are a number of excellent mods and other documentation that's been posted but hasn't made it to the manuals section of the forum. Might be time to revisit.

A lot of what's posted to threads would take some work to convert to a standalone document. Anyone want to volunteer to do a few?