Morryde steps in a cyclone

[Flooringit]

I have a cyclone 4000 2014year. I want to out the morryde steps but the threshold seems to be a different style then the pics they show. Mine has a curve in the threshold and it says to have 3/8 clearance for the step. It’s hard to tell with the brush on bottom of screen door. Has anyone put the steps in this style of threshold?

 

[jeffdee]

I have a cyclone 4000 2014year. I want to out the morryde steps but the threshold seems to be a different style then the pics they show. Mine has a curve in the threshold and it says to have 3/8 clearance for the step. It’s hard to tell with the brush on bottom of screen door. Has anyone put the steps in this style of threshold?

I installed a set of Morryde steps (STP 4-30-03H) in my Cyclone 3110 a few days ago. Before I screwed down the hinge I checked the fit. The door was a little reluctant to close. After I initially installed 2 screws I used a lead shot filled rubber hammer to better form fit the stairs to the threshold. Everything fits like a glove now and the door closes correctly. I did have to remove the cylinder from the top of the door so the stairs can be moved in and out. I also ordered a rubber door stop to put on the wall to protect the door.

 

[Flooringit]

Thank you. I will be getting a set soon.