Project LM 365

[Jesstruckn/Jesstalkn]

Jerrod,
I was thinking of doing a power strip type setup that way you can disconnect the axles if needed. I took one wire from each axle and ran it to trailer ground right there at the axles.

- - - Updated - - -


I want to get myself one of those clamp tools.

I just rolled under there and I have a good smash crimp on all of the electric brake wire and they are taped up good. I'm going to leave them alone...

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Also I've been using the pex crimp tool the last few weeks and it's pretty slick. I'm sure it's going to be even better with the brass fittings.

Sent from my XT1254 using Tapatalk

 

[Bones]

I just rolled under there and I have a good smash crimp on all of the electric brake wire and they are taped up good. I'm going to leave them alone...

Sent from my XT1254 using Tapatalk

I put a smash crip on mine for now and taped it. One day I may improve it a bit.

 

[Jesstruckn/Jesstalkn]

New very small messy Mod project
I've been tossing this 50amp to 30amp adapter cord around in my basement. Never really wanting to stuff it in a tub just in case I need it.
Well this popped into my head yesterday..
Took a piece of 1/2 PVC pipe and cut out about a 1/2 strip of it then sanded it to desired size cleaned up the edges with the belt sander, drilled 2 counter sunk holes and mounted it in the docking station.

Sent from my XT1254 using Tapatalk

 

[jbeletti]

New Remco water pump on its way from Heartland

Sent from my XT1254 using Tapatalk

Hate to have a problem, but it's sure nice to have a two-year warranty

 

[jbeletti]

Jim I blame you !!!!

Going to redo everything I can get to.
I'm in and out of there alot and the plastic fittings are fragile, I don't want to find out the hard way that I broke something in there after its all buttoned up.

Sent from my XT1254 using Tapatalk

Oh go ahead and blame me Seriously, you picked up some really nice stuff. Your plumbing kit is now rivaling mine.

 

[Jesstruckn/Jesstalkn]

That's for sure Jim
I paid 5k more for extra 5 more years to and I seem to be doing all of the work. I'm thinking of cancelling the extra and getting my money back

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

That's for sure Jim
I paid 5k more for extra 5 more years to and I seem to be doing all of the work. I'm thinking of cancelling the extra and getting my money back

Sent from my XT1254 using Tapatalk

When the new pump get here I'll dive in there and make it pop.

Sent from my XT1254 using Tapatalk

 

[jbeletti]

That's for sure Jim
I paid 5k more for extra 5 more years to and I seem to be doing all of the work. I'm thinking of cancelling the extra and getting my money back

Sent from my XT1254 using Tapatalk

5 more years of what? Extended warranty? $5k seems steep but I've never bought one so I don't know for sure. But you're right, you're getting pretty good at taking care of your own stuff! Maybe an extended warranty is not money well spent in your case.

 

[Jesstruckn/Jesstalkn]

I think your right Jim
I will be looking into that.

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Update on the motion sensors. Awesome
Of course the pantry and the entry closet motion sensors are working very well, the magnet switch would work just as well. I found the motion sensors to be easier to install.
As for the porch/scare light, this is the best thing yet. The only thing that would make it better is a day night sensor. This motion sensor does sense the slightest body movement or vehicles passing by 40' away. anything with in straight view of the entry steps. I just leave it on 24-7 works great. Well worth the extra effort I had to do to run the wires.
https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=479415&viewfull=1#post479415

 

[kdubinwa]

They make em and can handle up to 6 amps... but apparently only available across the pond.



http://www.ebay.com/itm/12v-DAY-NIG...ash=item2c73e8d4fd:g:zMkAAOxy2HFSUiSE&vxp=mtr

The only thing that would make it better is a day night sensor.

 

[Jesstruckn/Jesstalkn]

They have all the good stuff over there. LOL

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

I just made my- suction side of the pump one-way check valve adapter. I install it after ..... I'll install the new pump and test it out to see if it fixed my back flow problem.
If it fixes my problem then I guess I don't need no stinking one-way check valve !!! Right ???

And if anyone need any help or parts camping with me I got you covered.

Sent from my XT1254 using Tapatalk

 

[Jesstruckn/Jesstalkn]

Just switched out my single incandescent light with the double LED light in my battery compartment. Not sure why the Landmark 365 still has these old school lights. Still have a few more on here to do.

Sent from my XT1254 using Tapatalk

 

[Bones]

Nice plumbing kit. I have plumbing mods I want to do but I have been kindly informed that as soon as I finish the current mods I have planned then no more mods for a little while. oh well.

 

[Jesstruckn/Jesstalkn]

LOL tell her it's a repair, preventative maintenance..
And why you are in there then you might as well do it right.

Sent from my XT1254 using Tapatalk

 

[TikiDawg]

It's been more than 24 hours without a post from Jerrod. Has the list of Mods dried up?

 

[Jesstruckn/Jesstalkn]

LOL Steve
I'm camping again
I just finished fixing my awning, it was pulling out of the groove. Does that count ?

Sent from my XT1254 using Tapatalk

 

[TikiDawg]

Everything counts... I really enjoy reading about all of your mods.

Sent from my SM-G900V using Tapatalk