olcoon
Well-known member
We noticed that there was a piece of plastic hanging loose on the bottom of the shower door and the door was extremely hard to close. I thought no problem, I'll just get a new sweep & replace it. Got the new one & replaced it. The door was still hard to close. Then I noticed that on the hinge side of the door there was from 1/2-3/4" gap, while on the other side of the door, it's dragging. Probably what caused the plastic sweep to come apart. I looked at the hinges, and there is a screw at the top & bottom of the door apparently to adjust the hinges. I loosened them, & tried to adjust the door, and it didn't seem like anything happened. I searched in past posts (all 9 pages) & didn't really find anything that would apply. Before I used too much force & possibly break something I thought I'd check with the experts on here to maybe get some ideas. We've got a 2010 Elk Ridge 27RLSS.