SOLVED - DEAD Receptacles

BigJim45

Luv'n Life
Have two dead receptacles in my on door side. Both of these operate the lounge chair. One is plugged into each receptacle on each side.
Have checked and reset all breakers, have checked all fuses, even turned shore power off. This problem has me puzzled.

Any help would be appreciated.

want to get rid of extension cord for lounge chair.

PROBLEM SOLVED

 
Last edited:

dykesj11

Well-known member
Re: DEAD Receptacles

No idea if this will work for you but try resetting the GFCI in the bathroom. It seems to affect a lot of outlets.


Sent from my iPhone using Tapatalk Pro
 

jimtoo

Moderator
Re: DEAD Receptacles

If you have also reset the GFI, then look outside under the slide for a junction box where 120v power is routed. Check to make sure a wire did not become disconnected inside the box. Make sure and unplug from campsite power before opening junction box.

Jim M
 

BigJim45

Luv'n Life
Re: DEAD Receptacles

No idea if this will work for you but try resetting the GFCI in the bathroom. It seems to affect a lot of outlets.


Sent from my iPhone using Tapatalk Pro

Tried that also. No help on resetting GFI

- - - Updated - - -

This all happened after unplugging a B&D small vac that the wife had used.
 

Relayman

Well-known member
Re: DEAD Receptacles

check the GFCI on your kitchen / island outlet.

Sent from my SM-G930V using Tapatalk
 

Relayman

Well-known member
Re: DEAD Receptacles

you could have a faulty gfci that wont reset.

Sent from my SM-G930V using Tapatalk
 
Re: DEAD Receptacles

We had to change the outlet, it was bad. From other forums this is common


Sent from my iPhone using Tapatalk
 

CDN

B and B
Re: DEAD Receptacles

Hello,
Check the umbilical under the slide. It might have been damaging by road debris. Also there might be a connection block somewhere that hooks up to the umbilical that might have a loose connection. Make sure power is off!
 

BigJim45

Luv'n Life
Re: DEAD Receptacles

Found loose wire in J-box on interior door side slide.
All fixed now.😀😀😀

Sent from my SM-G925V using Tapatalk
 
Top