Torque value for lug nuts on San Antonio

[irishrover13]

Hello everyone. I hope your summer is going well. Just a short question: I am changing the oil bath bearings on my 2013 San Antonio to grease packed and need to know the torque setting for fastening/ tightening the lug nuts. I get different answers from 125ft/lbs to 140ft/lbs. The trailer is equipped with hydraulic disc brakes.
Doug

 

[cookie]

I think your would be alright using any of the numbers that you provided.
I torque mine at 130 ft lbs.

Peace
Dave

 

[rxbristol]

The torque value is 120 ft lbs. Remember to re-check after 50 and 100 miles. I was surprised, after re-installing the wheels, that each wheel, on the two checks, had one or more lugs that were not to torque value.

 

[Bobby A]

I do 125 on mine

 

[MTPockets]

I do 125 on mine

I'm pretty sure that's the Dexter Spec.

 

[jmgratz]

Wheel manufacturer and Lippert say 120 ftps on a G rated 16" rim

 

[irishrover13]

Thank you all. I think the Dexter 125 is a good answer. I have Dexter installed hydraulic disc brakes on the Dexter axles so it seems a safe bet. Again thanks for the quick response. I'll finish the job this weekend.