Wanted easier access to gray tank valve.I cut all the way across plastic behind sewer pipe.I used a piece of uni-strut across trailer frame above edge of frame. I attached a piece of plastic divider used between lattice panels to uni-strut. After trimming plastic underbelly was able to slide it in divider. I have to put some screws to hold underbelly in place yet.If it holds up on road access will be easier. I didn't take pictures when I started but I think you can see what I did.
First 2 pics are of uni-strut and divider last 2 are installed in camper it also will give some support to grey tank. Got to dark to finish.
First 2 pics are of uni-strut and divider last 2 are installed in camper it also will give some support to grey tank. Got to dark to finish.