We have a 2009 Sundance 2900mk.
According to my measurements, there is enough room to fit a 32" LCD TV on the wall between the base and upper cabinet.
The weight of the LCDs that I am looking at are as follows:
26" = weighs approx 17.9 lbs
32" = weighs approx 25.6 lbs
* not sure how much the support bracket weighs
(wall mount http://www.futureshop.ca/catalog/pr...d=EN&sku_id=0665000FS10088578&catid=#MoreInfo)
I understand that the studs are wood and there is a 3/4" backer board inside the wall near the center.
My question is:
Will the design of the wood backer in the wall support the weight of a 32" LCD + the bracket,
or
Will it only support the weight of a 26" + bracket.
I would prefer to buy a 32" but will settle on the 26" if the weight is an issue.
Thanks
According to my measurements, there is enough room to fit a 32" LCD TV on the wall between the base and upper cabinet.
The weight of the LCDs that I am looking at are as follows:
26" = weighs approx 17.9 lbs
32" = weighs approx 25.6 lbs
* not sure how much the support bracket weighs
(wall mount http://www.futureshop.ca/catalog/pr...d=EN&sku_id=0665000FS10088578&catid=#MoreInfo)
I understand that the studs are wood and there is a 3/4" backer board inside the wall near the center.
My question is:
Will the design of the wood backer in the wall support the weight of a 32" LCD + the bracket,
or
Will it only support the weight of a 26" + bracket.
I would prefer to buy a 32" but will settle on the 26" if the weight is an issue.
Thanks